Sulfonated poly(aryl ether ketone)s containing naphthalene moieties obtained by direct copolymerization as novel polymers for proton exchange membranes
- 3 May 2004
- journal article
- research article
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 42 (12) , 2866-2876
Abstract
A series of sulfonated poly(aryl ether ketone)s (SPAEKs) were prepared by aromatic nucleophilic polycondensation of 2,6‐dihydroxynaphthalene with 5,5′‐carbonyl‐bis(2‐fluorobenzenesulfonate) and 4,4′‐difluorobenzophenone. The structure and degree of sulfonation (DS) of the SPAEKs were characterized using 1H NMR spectroscopy. The experimentally observed DS values were close to the expected values derived from the starting material ratios. The thermal stabilities of the SPAEKs were characterized by thermogravimetric analysis, which showed that in acid and sodium salt forms they were thermally stable in air up to about 240 and 380 °C, respectively. Transparent membranes cast from the directly polymerized SPAEKs exhibited good mechanical properties in both dry and hydrated states. The dependence of water uptake and of membrane swelling on the DS at different temperatures was studied. SPAEK membranes with a DS from 0.72 to 1.60 maintained adequate mechanical properties after immersion in water at 80 °C for 24 h. The proton conductivity of SPAEK membranes with different degrees of sulfonation was measured as a function of temperature. The proton conductivity of the SPAEK films increased with increased DS, and the highest room temperature conductivity (4.2 × 10−2 S/cm) was recorded for a SPAEK membrane with a DS of 1.60, which further increased to 1.1 × 10−1 S/cm at 80 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2866–2876, 2004Keywords
This publication has 44 references indexed in Scilit:
- Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranesJournal of Membrane Science, 2004
- Development of ionomer membranes for fuel cellsJournal of Membrane Science, 2001
- Polymeric proton conducting membranes for medium temperature fuel cells (110–160°C)Journal of Membrane Science, 2001
- On the development of proton conducting polymer membranes for hydrogen and methanol fuel cellsJournal of Membrane Science, 2001
- Proton-conducting polymer electrolyte membranes based on hydrocarbon polymersProgress in Polymer Science, 2000
- Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applicationsJournal of Membrane Science, 2000
- Electron and proton conducting polymers: recent developments and prospectsElectrochimica Acta, 2000
- Sulfonated poly(aryl ether ketone)sDie Angewandte Makromolekulare Chemie, 1998
- Proton-conducting polymers derived from poly(ether-etherketone) and poly(4-phenoxybenzoyl-1,4-phenylene)Solid State Ionics, 1998
- Partially sulfonated poly(arylene ether sulfone) - A versatile proton conducting membrane material for modern energy conversion technologiesJournal of Membrane Science, 1993