Modeling, analysis, and validation of an active T-shaped noise barrier
- 1 September 2013
- journal article
- research article
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 134 (3) , 1990-2003
Abstract
With ever-increasing land traffic, abatement of traffic noise using noise barriers remains significant, yet it is a challenging task due to spatial competition with other infrastructure. In this study, a deep insight into the diffraction characteristics of acoustic fields near noise barriers of various geometries and surface conditions was achieved using numerical simulations. A T-shaped passive noise barrier with acoustically soft upper surfaces was demonstrated to outperform other candidates in a middle- or high-frequency range. Based on attributes of the acoustic field diffracted by T-shaped barriers, an active control strategy was developed to revamp the T-shaped barrier, in which a filtered minimax algorithm was established to drive the secondary sound sources. This algorithm resulted in more uniformly distributed residual sound fields than a filtered-X least mean square algorithm. Performance of the actively controlled barrier was evaluated at different positions and spacings of secondary sound sources and error sensors, leading to a series of optimal criteria for the design of active noise barriers. A prototype was fabricated and validated experimentally, manifesting particular effectiveness in insulating low-frequency noise, supplementing well the capacity of a passive T-shaped barrier which is effective in the middle- or high-frequency range.Keywords
This publication has 23 references indexed in Scilit:
- Single- and multi-objective shape design of Y-noise barriers using evolutionary computation and boundary elementsAdvances in Engineering Software, 2010
- Efficiency of edge-modified noise barriers: Intrinsic efficiency determination of practical products and prediction of the diffracted sound fieldAcoustical Science and Technology, 2010
- Optimization of multiple edge barriers with genetic algorithms coupled with a Nelder–Mead local searchJournal of Sound and Vibration, 2007
- Simple prediction method for sound propagation behind edge-modified barriersAcoustical Science and Technology, 2007
- Performance of profiled single noise barriers covered with quadratic residue diffusersApplied Acoustics, 2005
- Performance of noise barriers with various edge shapes and acoustical conditionsApplied Acoustics, 2004
- Integration of the efficiency of noise barrier caps in a 3D ray tracing method. Case of a T-shaped diffracting deviceApplied Acoustics, 2003
- EFFICIENCY OF A NOISE BARRIER ON THE GROUND WITH AN ACOUSTICALLY SOFT CYLINDRICAL EDGEJournal of Sound and Vibration, 1998
- Noise barriers with reactive surfacesApplied Acoustics, 1998
- Basic study on active noise barrier.Acoustical Science and Technology, 1991