Laboratory Investigation of Misaligned Dowel Behavior
Authors:
- Kyle HoeghKHKyle Hoegh
- Lev KhazanovichLev Khazanovich
- 1 January 2010
- journal article
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 38 (1) , 127-135
Abstract
Dowels are inserted at the mid-depth of joints in jointed concrete pavements that are exposed to heavy loading to provide load transfer and reduce pumping and faulting. Dowel alignment tolerances in North America have traditionally been strict, although not based on substantial performance data. In this paper, new laboratory testing methods are proposed for evaluation of the effects of dowel misalignment on concrete joint behavior. In these tests, dowels with various levels of rotations and translations were subjected to pullout and shear loading. It was found that dowel misalignment does not have a significant effect on pullout and shear forces for certain ranges of misalignments, which far exceed the tolerances recommended by the Federal Highway Administration. At the same time, it was found that extreme cases and combinations of misalignment resulted in a significant decrease in initial stiffness and shear capacity. Therefore, there is a need for the establishment of rational alignment tolerances. The results of this study provide important information for the development of such tolerances.Keywords
This publication has 8 references indexed in Scilit:
- Guidelines for Dowel Alignment in Concrete Pavements2009
- Evaluation of Dowel Alignment Constructability in Portland Cement Concrete PavementsTransportation Research Record: Journal of the Transportation Research Board, 2009
- Laboratory Evaluation of Alternative Dowel Bars for Use in Portland Cement Concrete Pavement ConstructionTransportation Research Record: Journal of the Transportation Research Board, 2007
- Accelerated Loading Testing of Stainless Steel Hollow Tube DowelsTransportation Research Record: Journal of the Transportation Research Board, 2006
- Experimental Investigation of Effects of Dowel Misalignment on Joint Opening Behavior in Rigid PavementsTransportation Research Record: Journal of the Transportation Research Board, 2006
- MECHANISTIC EVALUATION OF VERTICAL MISALIGNMENT OF DOWEL BARS AND THEIR EFFECTS ON JOINT PERFORMANCEProceedings of the International Conference on Concrete Pavements, 2001
- Using the Minnesota Accelerated Loading Facility to Test Retrofit Dowel Load Transfer SystemsTransportation Research Record: Journal of the Transportation Research Board, 2001
- Component Dowel-Bar Model for Load-Transfer Systems in PCC PavementsJournal of Transportation Engineering, 1995