Evaluation of a Cold-Mixed High-Performance Polyurethane Mixture
Authors:
Open Access
- 7 November 2019
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2019, 1-12
Abstract
The energy consumption and greenhouse gas emission of asphalt pavement have become a very serious global problem. The high-temperature stability and durability of polyurethane (PU) are very good. It is studied as an alternative binder for asphalt recently. However, the strength-forming mechanism and the mixture structure of the PU mixture are different from the asphalt mixture. This work explored the design and performance evaluation of the PU mixture. The PU content of mixtures was determined by the creep slope (K), tensile strength ratios (TSR), immersion Cantabro loss (ICL), and the volume of air voids (VV) to ensure better water stability. The high- and low-temperature stability, water stability, dynamic mechanical property, and sustainability of the PU mixture were evaluated and compared with those of the stone matrix asphalt mixture (SMA). The test results showed that the dynamic stability and bending strain of the PU mixture were about 7.5 and 2.3 times of SMA. The adhesion level of PU and the basalt aggregate was one level greater than the limestone, and basalt aggregates were proposed to use in the PU mixture to improve water stability. Although the initial TSR and ICL of PU mixture were lower, the long-term values were higher; the PUM had better long-term water damage resistance. The dynamic modulus and phase angles () of the PU mixture were much higher. The energy consumption and CO2 emission of the PU mixture were lower than those of SMA. Therefore, the cold-mixed PU mixture is a sustainable material with excellent performance and can be used as a substitute for asphalt mixture.
Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (310821163502, Lujiaokeji (2017) 28, 2017 44, 2018610002000604, 18JK0079)
- Transportation Department of Shandong Province (310821163502, Lujiaokeji (2017) 28, 2017 44, 2018610002000604, 18JK0079)
- Xixian New District Management Committee of Shaanxi Province (310821163502, Lujiaokeji (2017) 28, 2017 44, 2018610002000604, 18JK0079)
- Science and Technology Bureau of Pingdingshan of China (310821163502, Lujiaokeji (2017) 28, 2017 44, 2018610002000604, 18JK0079)
- Education Department of Shaanxi Province (310821163502, Lujiaokeji (2017) 28, 2017 44, 2018610002000604, 18JK0079)
This publication has 18 references indexed in Scilit:
- Energy consumption and environmental impact of rubberized asphalt pavementJournal of Cleaner Production, 2018
- Suitability of PoroElastic Road Surface (PERS) for urban roads in cold regions: Mechanical and functional performance assessmentJournal of Cleaner Production, 2017
- Effects of material composition on mechanical and acoustic performance of poroelastic road surface (PERS)Construction and Building Materials, 2017
- Economic and environmental impact study of warm mix asphalt compared to hot mix asphaltJournal of Cleaner Production, 2016
- Drivers and barriers of extended supply chain practices for energy saving and emission reduction among Chinese manufacturersJournal of Cleaner Production, 2013
- GB5 mix design: high-performance and cost-effective asphalt concretes by use of gap-graded curves and SBS modified bitumensRoad Materials and Pavement Design, 2012
- Characterization of OGFC Mixtures Containing Reclaimed Polyethylene FibersJournal of Materials in Civil Engineering, 2011
- Damping, thermal, and mechanical properties of polyurethane based on poly(tetramethylene glycol)/epoxy interpenetrating polymer networks: effects of composition and isocyanate indexApplied Physics A, 2010
- On the Optimization of the Aggregate Packing Characteristics for the Design of High-Performance Asphalt ConcretesRoad Materials and Pavement Design, 2010
- Quantitative Assessment of Environmental Impacts on Life Cycle of HighwaysJournal of Construction Engineering and Management, 2003