The 2D hydro‐mechanically coupled response of a rock mass with fractures via a mixed BEM–FEM technique
Author:
- 9 January 2007
- journal article
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 31 (11) , 1329-1348
Abstract
This paper describes the essential features of a numerical technique for the simulation of the coupled fluid flow and deformation in a 2D assembly of poroelastic blocks and transmissive fractures. The boundary element method (BEM) is applied to each block to reduce Navier and diffusion equations to a set of integral equations involving block boundary terms, whereas a Galerkin weighted‐residuals finite element method (FEM) is applied to the fracture diffusion equations. In addition, fracture local equilibrium is rendered through spring‐like equations relating the stresses to the relative displacements of the fracture walls. A time‐marching process is implemented leading to an algebraic system where the right‐hand side vector is built based on the collected solutions of the previous time steps. The technique requires the meshing of the fracture network only. The accuracy of the results is adequate even with relatively coarse meshes without the resort to small time steps at the beginning of the simulation. It furnishes outputs that focus only on the salient features of the response. The efficiency of the technique is demonstrated through the illustration of the results of three examples. Copyright © 2007 John Wiley & Sons, Ltd.Keywords
This publication has 25 references indexed in Scilit:
- Grid refinement for modeling multiphase flow in discretely fractured porous mediaAdvances in Water Resources, 1999
- A BEM Code for Ground-Water Problems in Multizoned Domains with Normal Boundary Flux DiscontinuitiesGroundwater, 1996
- Elastoplastic analysis of jointed rocks using a coupled finite element and boundary element methodInternational Journal for Numerical and Analytical Methods in Geomechanics, 1994
- Modeling of naturally fractured reservoirs using deformation dependent flow mechanismInternational Journal of Rock Mechanics and Mining Sciences, 1993
- A time domain boundary element method for poroelasticityInternational Journal for Numerical Methods in Engineering, 1989
- Transient boundary element formulation for linear poroelasticityApplied Mathematical Modelling, 1987
- Fluid mass sources and point forces in linear elastic diffusive solidsMechanics of Materials, 1986
- A coupled finite element-boundary element method of stress analysisInternational Journal of Rock Mechanics and Mining Sciences, 1981
- Mass transport of solutes in dual‐porosity mediaWater Resources Research, 1981
- Fundamental solutions for a fluid-saturated porous solidInternational Journal of Solids and Structures, 1977