Numerical Analysis of the 3D Swirling Flow in Centrifugal Compressor Volutes
Authors:
Open Access
- 24 May 1993
- conference paper
- Published by ASME International
Abstract
The improvement of centrifugal compressor performance and the control of the radial forces acting on the impeller due to the circumferential variation of the static pressure caused by the volute require a good understanding of the flow mechanisms and an accurate prediction of the flow pattern inside the volute. A 3D volute calculation method has been developed for this purpose. The volute is discretized by means of hexahedral elements. A cell vertex finite volume approach is used in combination with a time marching procedure. The numerical procedure makes use of a central space discretization and a four step Runge-Kutta time stepping scheme. The artificial dissipation used in the solver is based on the fourth order differences of the conservative variables. Implicit residual smoothing improves the convergence rate. The loss model implemented in the code accounts for the losses due to internal shear and friction losses on the walls. A comparison of the calculated and measured results inside a volute with elliptical cross sectional shape reveals that the modified Euler solver accurately predicts the velocity and pressure distribution inside and upstream of the volute.Keywords
This publication has 7 references indexed in Scilit:
- Calculations on the Time-Dependent Potential Flow in a Centrifugal Pump1992
- Experimental Study of the Swirling Flow in the Volute of a Centrifugal PumpJournal of Turbomachinery, 1992
- The Use of a Distributed Body Force to Simulate Viscous Effects in 3D Flow Calculations1986
- Computation of flow around wings based on the Euler equationsJournal of Fluid Mechanics, 1984
- Solution of the Euler equations for complex configurations1983
- Numerical solution of the Euler equations by finite volume methods using Runge Kutta time stepping schemes1981
- Volute Pressure Distribution, Radial Force on the Impeller, and Volute Mixing Losses of a Radial Flow Centrifugal PumpJournal of Engineering for Power, 1960