Reinforcing Porous Silica with Carbon Nanotubes to Enhance Mechanical Performance
Authors:
- 1 April 2007
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 41 (8) , 979-991
Abstract
In this study, porous silica (SiO2) film is reinforced with carbon nanotubes (CNTs), which gets homogeneously dispersed in porous SiO 2 gel by ultrasonic stirring. The size of SiO2 molecules is the same as that of nanotubes, so a fine CNTs/SiO2 network is formed. Nanoindenters used to test the mechanical properties of the resulting specimens show a marked enhancement in the properties as a function of filler content. Interfacial bonding and the distribution of CNTs also strongly affected the mechanical performance. Although a high concentration of CNTs improves the mechanical characteristics of the matrix, it also causes agglomeration such that the mechanical performance at the surface was disproportionate. Fourier transform infrared spectroscopy (FTIR) analysis indicates that there is little chemical reaction occurring between CNTs and SiO2. The results suggest that CNTs are ineffective reinforcements.Keywords
This publication has 28 references indexed in Scilit:
- Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube contentComposites Science and Technology, 2004
- Mechanical characterization of low-k dielectric materials using nanoindentationMicroelectronic Engineering, 2004
- Comparison of mechanical properties of porous and non-porous low-k dielectric filmsMicroelectronic Engineering, 2004
- Determination of the hardness and elastic modulus of low-k thin films and their barrier layer for microelectronic applicationsMicroelectronic Engineering, 2003
- The effect of SiO2 addition on porous silica composite strengthMaterials Letters, 2003
- High strength, low dielectric constant fluorinated silica xerogel filmsApplied Physics Letters, 2001
- Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanismNature, 1992
- Small punch test to predict ductile fracture toughness JIC and brittle fracture toughness KICScripta Metallurgica et Materialia, 1991
- A method for interpreting the data from depth-sensing indentation instrumentsJournal of Materials Research, 1986
- Effect of Trace Impurities on Devitrification of Vitreous SilicaJournal of the American Ceramic Society, 1983