CHEMICAL VAPOR DEPOSITION OF SILICON ONTO IRON AND STEEL SUBSTRATES: OXIDATION AND CORROSION PROPERTIES OF COATED MATERIALS
Authors:
- 1 January 1991
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 6 (3) , 451-467
Abstract
The influence of the gaseous phase composition (SiH4 or SiCI4 diluted with argon or hydrogen), used for chemical vapor deposition of silicon onto two different substrates (pure iron or low chromium mild steel) is investigated. Depending on the chosen process, two types of coatings are developed: either a very adherent, non-porous solid solution containing up to 6 to 7 wt. % Si, or a Fe3Si iron silicide (14.35 wt. %). This solid solution coating considerably improves the oxidation resistance properties of steels at temperatures up to 800° C. This beneficial effect was not observed on the corrosion behavior of treated samples in sulfuric acid solutions. In contrast, the Fe3Si iron silicide has the same outstanding corrosion resistance that the silicon-rich cast alloys have in very severe environments such as boiling concentrated sulfuric acid. But this remarkable behavior is certainly limited in other mediums by the open porosity of the coating, inherent to the chemical vapor process.Keywords
This publication has 7 references indexed in Scilit:
- Vapour-phase siliconizing of iron plate and crystal growth of FeSi2 using Si2Cl6 as a source of siliconJournal of Crystal Growth, 1987
- Oxidation of iron-silicon alloysOxidation of Metals, 1987
- The Anodic Polarization Characteristics of Fe-Si-Al Alloys in 1N H2SO4Corrosion, 1984
- A theoretical analysis of the oxidation of FeSi alloysCorrosion Science, 1982
- Protection du fer contre l'oxydation par siliciuration superficielleMaterials Chemistry, 1980
- The influence of silicon on the oxidation properties of ironCorrosion Science, 1974
- Anodic Polarization Behavior of Fe-Si Alloys in Sulfuric Acid SolutionsCorrosion, 1972