SiNx Coatings Deposited by Reactive High Power Impulse Magnetron Sputtering: Process Parameters Influencing the Nitrogen Content
- 26 July 2016
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (31) , 20385-20395
Abstract
Reactive high power impulse magnetron sputtering (rHiPIMS) was used to deposit silicon nitride (SiNx) coatings for biomedical applications. The SiNx growth and plasma characterization were conducted in an industrial coater, using Si targets and N2 as reactive gas. The effects of different N2-to-Ar flow ratios between 0 and 0.3, pulse frequencies, target power settings, and substrate temperatures on the discharge and the N content of SiNx coatings were investigated. Plasma ion mass spectrometry shows high amounts of ionized isotopes during the initial part of the pulse for discharges with low N2-to-Ar flow ratios of 2-to-Ar flow ratio at the pulse end and during pulse-off times. Langmuir probe measurements show electron temperatures of 2–3 eV for nonreactive discharges and 5.0–6.6 eV for discharges in transition mode. The SiNx coatings were characterized with respect to their composition, chemical bond structure, density, and mechanical properties by X-ray photoelectron spectroscopy, X-ray reflectivity, X-ray diffraction, and nanoindentation, respectively. The SiNx deposition processes and coating properties are mainly influenced by the N2-to-Ar flow ratio and thus by the N content in the SiNx films and to a lower extent by the HiPIMS frequencies and power settings as well as substrate temperatures. Increasing N2-to-Ar flow ratios lead to decreasing growth rates, while the N content, coating densities, residual stresses, and the hardness increase. These experimental findings were corroborated by density functional theory calculations of precursor species present during rHiPIMS.Keywords
Funding Information
- Carl Tryggers Stiftelse för Vetenskaplig Forskning (CTS 14:431)
- Seventh Framework Programme (310477)
- Internationellt interdisciplinärt laboratorium för avancerade funktionella material, Linköpings universitet (2009-00971)
This publication has 53 references indexed in Scilit:
- Silicon nitride films for the protective functional coating: Blood compatibility and biomechanical property studyJournal of the Mechanical Behavior of Biomedical Materials, 2012
- Celebrating the 100th anniversary of the Stoney equation for film stress: Developments from polycrystalline steel strips to single crystal silicon wafersThin Solid Films, 2009
- Ion composition produced by high power impulse magnetron sputtering discharges near the substrateJournal of Applied Physics, 2008
- The ion energy distributions and ion flux composition from a high power impulse magnetron sputtering dischargeThin Solid Films, 2006
- A comparative study of the electron distribution function in the positive columns in and /He dc glow discharges by optical spectroscopy and probesPlasma Sources Science and Technology, 1998
- Langmuir probe analysis of distributed electron cyclotron resonance silicon nitride deposition plasmaApplied Physics Letters, 1998
- Surface nitridation of silicon dioxide with a high density nitrogen plasmaJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1997
- Quenching of electron temperature and electron density in ionized physical vapor depositionJournal of Vacuum Science & Technology A, 1997
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Thermal Expansion of Sputtered Silicon Nitride FilmsJournal of the Electrochemical Society, 1969