SiO2/c-Si Bilayer Electron-Beam Resist Process for Nano-Fabrication
Authors:
- Sucheta M. GorwadkarSGSucheta M. Gorwadkar
- Toshimi WadaTWToshimi Wada
- Satoshi HaraichiSHSatoshi Haraichi
- Hiroshi HiroshimaHHHiroshi Hiroshima
- Kenichi IshiiKIKenichi Ishii
- Masanori KomuroMKMasanori Komuro
- 1 December 1996
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 35 (12S)
Abstract
We have developed an SiO2/c-Si bilayer electron beam resist process in order to overcome the problems encountered in our previously developed SiO2/poly-Si resist system. The process parameters which include the electron beam exposure conditions, thicknesses of resist layers, etching of SiO2 and c-Si by using buffered HF solution and NMD-3 solution, respectively, are optimized. The developed SiO2/c-Si EB resist system is used to produce a suspended mask structure with an opening of 12 nm width for the double angle deposition of Ti for our proposed ultrasmall metal-insulator-metal tunnel junction fabrication process. We have also demonstrated the successful lift-off of inorganic resist by removing underlying c-Si layer of 40 ×40 µ m2 area using NMD-3 solution at 70° C, leaving an array of isolated Ti–TiO x –Ti dots, each having few hundred nm2 area, on the substrate.Keywords
This publication has 9 references indexed in Scilit:
- SiO2/Poly-SiMultilayered Electron Beam Resist Process for Fabrication of Ultrasmall Tunnel JunctionsJapanese Journal of Applied Physics, 1995
- Nanobeam process system: An ultrahigh vacuum electron beam lithography system with 3 nm probe sizeJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1995
- Electron beam writing and direct processing system for nanolithographyNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 1995
- Structural characterization of oxidized titanium surfacesJournal of Applied Physics, 1995
- Characteristics of SiO2 as a High-Resolution Electron Beam ResistJapanese Journal of Applied Physics, 1993
- Direct nanometer scale patterning of SiO2 with electron beam irradiation through a sacrificial layerApplied Physics Letters, 1990
- 250-Å linewidths with PMMA electron resistApplied Physics Letters, 1978
- Oxidation of titanium between 25°C and 400°CSurface Science, 1973
- Fabrication of planar silicon transistors without photoresistSolid-State Electronics, 1968