Numerical Study of Solidification in a Plate Heat Exchange Device with a Zigzag Configuration Containing Multiple Phase-Change-Materials
Open Access
Abstract
Latent heat thermal energy storage (TES) plays an important role in the advocation of TES in contrast to sensible energy storage because of the large storage energy densities per unit mass/volume possible at a nearly constant thermal energy. In the current study, a heat exchange device with a zigzag configuration containing multiple phase-change-materials (m-PCMs) was considered, and an experimental system was built to validate the model for a single PCM. A two-dimensional numerical model was developed using the ANSYS Fluent 14.0 software program. The energy fractions method was put forward to calculate the average Ste number and the influence of Re and Ste numbers on the discharge process were studied. The influence of phase change temperature among m-PCMs on the solidification process has also been studied. A new boundary condition was defined to determine the combined effect of the Re and Ste numbers on the discharging process. The modelling results show that for a given input power, the Ste (or Re) number has a significant impact on the discharging process; however, the period value of inlet velocity has almost no impact on it. Besides, the zigzag plate with m-PCMs has a good impact on the temperature shock as “filter action” in the discharging process.Keywords
This publication has 31 references indexed in Scilit:
- Energy conservative air conditioning system using silver nano-based PCM thermal storage for modern buildingsEnergy and Buildings, 2014
- Improved heat storage rate for an automobile coolant waste heat recovery system using phase-change material in a fin–tube heat exchangerApplied Energy, 2014
- Thermal performance of a solar storage packed bed using spherical capsules filled with PCM having different melting pointsEnergy and Buildings, 2014
- Review of thermal energy storage technologies based on PCM application in buildingsEnergy and Buildings, 2013
- Computation of melting with natural convection inside a rectangular enclosure heated by discrete protruding heat sourcesApplied Mathematical Modelling, 2013
- A numerical study of external building walls containing phase change materials (PCM)Applied Thermal Engineering, 2012
- Heat transfer and pressure drop studies on a PCM-heat exchanger module for free cooling applicationsInternational Journal of Thermal Sciences, 2011
- The development of a finned phase change material (PCM) storage system to take advantage of off-peak electricity tariff for improvement in cost of heat pump operationEnergy and Buildings, 2010
- Feasibility of an Advanced Waste Heat Transportation System Using High-temperature Phase Change Material (PCM)ISIJ International, 2010
- Transient cooling of electronics using phase change material (PCM)-based heat sinksApplied Thermal Engineering, 2008