An Integrated Performance-Based Screening Framework for Fiber-Reinforced Concrete Floating Dock Blocks for Offshore Renewable Energy Applications
Open Access
Abstract
Selecting fiber-reinforced concrete (FRC) for thin marine shells is a multi-constraint decision because lower cradle-to-gate global warming potential (GWP) at equal volume may be offset by post-cracking requirements, interface behavior, impact response, or detailing. This study introduces a performance-constrained, multi-evidence screening framework and illustrates it with traceable mechanical, fiber-field, marine-bond, impact, and life-cycle datasets for four self-compacting concrete systems with 90 kg/m3 of industrial and/or recycled steel fibers. Unlike a compensatory environmental–mechanical index, the framework applies simultaneous normalized response constraints, independent interface and component gates, deterministic ranking-sensitivity analysis, and component carbon-parity budgets. Compressive strengths were 60.03–66.10 MPa, whereas post-cracking properties varied substantially. At 80% retained performance, beam work favors I30R60, whereas an additional 3 mm splitting constraint favors I45R45. For a 0.144 m3 panel, I45R45 has 3.89 kg CO2-eq less reported cradle-to-gate GWP than I90R0, corresponding to only 5.50% additional concrete before carbon parity under the source inventory. Results depend on published means and inventory assumptions. The four documented 4.0 m impact tests (one slab per tested composition) illustrate the component gate as a proof of concept rather than a statistically supported pass/fail criterion. Replicated component testing and project-specific verification are required before design qualification.Keywords
Funding Information
- Fundação para a Ciência e a Tecnologia (2020.09697)
- European Regional Development Fund (POCI-01-0145-FEDER-028112)
This publication has 24 references indexed in Scilit:
- Environment-friendly recycled steel fibre reinforced concreteConstruction and Building Materials, 2022
- An experimental study on the corrosion susceptibility of Recycled Steel Fiber Reinforced ConcreteCement and Concrete Composites, 2019
- Mechanical properties of SFRC using blended Recycled Tyre Steel Cords (RTSC) and Recycled Tyre Steel Fibres (RTSF)Construction and Building Materials, 2018
- Mechanical properties of SFRC using blended manufactured and recycled tyre steel fibresConstruction and Building Materials, 2018
- On the mechanical response of Hybrid Fiber Reinforced Concrete with Recycled and Industrial Steel FibersConstruction and Building Materials, 2017
- Fibre‐reinforced concrete in fib Model Code 2010: principles, models and test validationStructural Concrete, 2013
- Measuring the eco-efficiency of cement useCement and Concrete Composites, 2010
- Use of steel fibres recovered from waste tyres as reinforcement in concrete: Pull-out behaviour, compressive and flexural strengthWaste Management, 2009
- Bending testMaterials and Structures, 2002
- Bond mechanism of FRP rebars to concreteMaterials and Structures, 1999