Resonant Grounded Isolation Transformers to Prevent Ignitions From Powerline Faults
- 12 October 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 36 (4) , 2287-2297
Abstract
Methods and research for preventing utility-caused wildfires have significantly advanced in the past few decades, including development of criteria on reduction of energy release in an electrical fault to mitigate the probability of ignitions. Technologies to minimize energy release during electrical faults and achieve these ignition benefits are being applied at the substation level. However, the benefits can be targeted to a high-risk area by resonant grounding an isolation transformer on a distribution circuit. By doing this it is possible to reduce single line to ground fault current beyond the transformer to a level unlikely to ignite fires. This system was constructed and shown capable of reducing the power into a phase-to-ground fault by a factor of more than 10,000 and detect ground faults smaller than 0.5 A. This allowed it to meet the ignition criteria mandated for distribution network fire safety in the Australian state of Victoria. It was also tested for typical ignition scenarios such as downed phase conductors and phase conductors contacting with a tree branch. In all cases the probability of ignition was reduced by 90% or more.Keywords
Funding Information
- Southern California Edison
This publication has 3 references indexed in Scilit:
- Resonant grounding applied in BrazilCIRED - Open Access Proceedings Journal, 2017
- Wildland fire spot ignition by sparks and firebrandsFire Safety Journal, 2017
- The RCC ground fault neutralizer - a novel scheme for fast earth-fault protection2005