Research on Unbalanced-Load Correction Capability of Two Power Electronic Transformer Topologies
Authors:
- 18 June 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 30 (6) , 3044-3056
Abstract
Compared with conventional power transformer, power electronic transformer (PET) has many merits and an increasing possibility to replace it in the future. In this paper, the unbalanced-load correction capability of two H-bridge based three-phase three-stage modular PET topologies, the separate-phase-connection (SPC) one and the cross-phase-connection (CPC) one, are analyzed and compared. Both of the SPC and CPC consist of three stages: a modular multilevel ac-dc input stage, an isolation stage with several independent modular dual active bridge (DAB) dc-dc converters, and a dc-ac output stage with single-phase-inverter parallel-connected structure. Based on the control strategy, it is found that the SPC is suitable for dealing with full-range unbalanced load under the condition of increasing the input-stage current stress. For the SPC feeding, one load or three loads with identical power polarity, the current stress shall be theoretically increased up to 115% of the rated one, while the percentage is 153% when the SPC feeds three loads with different power polarity. On the contrary, the CPC is only suitable for dealing with partial unbalanced-load conditions. Extendedly, the third so-called full-range-power auto-balance PET is proposed to deal with unbalanced load, the performance of which is verified by simulation results. A downscaled prototype for SPC and CPC is built and tested. Experimental results verify the unbalanced-load correction performance of SPC and CPC.Keywords
This publication has 28 references indexed in Scilit:
- Design and Demonstration of a 3.6-kV–120-V/10-kVA Solid-State Transformer for Smart Grid ApplicationIEEE Transactions on Power Electronics, 2013
- Future on Power Electronics for Wind Turbine SystemsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2013
- Power Electronic Traction Transformer-Low Voltage PrototypeIEEE Transactions on Power Electronics, 2013
- Comparisons of different three-stage three-phase cascaded modular topologies for Power Electronic Transformer2012
- Solid-State Transformer Architecture Using AC–AC Dual-Active-Bridge ConverterIEEE Transactions on Industrial Electronics, 2012
- A Transformerless D-STATCOM Based on a Multivoltage Cascade Converter Requiring No DC SourcesIEEE Transactions on Power Electronics, 2012
- A Novel DC Voltage Control Method for STATCOM Based on Hybrid Multilevel H-Bridge ConverterIEEE Transactions on Power Electronics, 2012
- Control and Performance of a Transformerless Cascade PWM STATCOM With Star ConfigurationIEEE Transactions on Industry Applications, 2007
- Power electronics traction transformer2007
- A three-phase soft-switched high-power-density DC/DC converter for high-power applicationsIEEE Transactions on Industry Applications, 1991