Drill‐bit position monitoring using seismic‐while‐drilling data; numerical and field examples from Sweden
Open Access
- 17 February 2023
- journal article
- research article
- Published by Wiley in Geophysical Prospecting
- Vol. 71 (7) , 1338-1355
Abstract
The undesired drill‐bit deviation is a source of drilling risks and requires monitoring. Seismic‐while‐drilling is one potential method to achieve this and has been tested in a number of previous studies. In August 2020 in Örebro, Sweden, we conducted an experiment to test the feasibility of seismic‐while‐drilling drill‐bit positioning and other applications of the method. We used the hammer drill‐bit signal generated while drilling a 200 m deep well in hardrock conditions and implemented vertical stacking of the subsequent impulsive signals from the hammer source, generating enhanced direct arrivals from the drill‐bit. Then, we used the relative arrival times to estimate the drill‐bit position for selected bit depths, confirming our methodology with two numerical studies. We successfully estimated the position of the drill‐bit for the numerical examples and for several of the real data examples, with the accuracy dependent on the receiver array geometry and the quality of the data. We conclude that this drill‐bit positioning method shows potential for near‐real‐time monitoring in drilling operations that could be applicable for both impulsive and noise‐retrieved drill‐bit signals.Keywords
This publication has 22 references indexed in Scilit:
- Drill-rig noise suppression using the Karhunen-Loéve transform for seismic-while-drilling experiment at Brukunga, South AustraliaExploration Geophysics, 2016
- Estimating the location of a tunnel using correlation and inversion of Rayleigh wave scatteringGeophysical Research Letters, 2013
- Locating near-surface scatterers using non-physical scattered waves resulting from seismic interferometryJournal of Applied Geophysics, 2013
- Imaging with ambient noisePhysics Today, 2010
- Positioning drill-bit and look-ahead events using seismic traveltime dataGeophysics, 2006
- Seismic MWD: Drilling in time, on time, it's about timeThe Leading Edge, 2005
- Seismic-while-drilling by using tunnel boring machine noiseGeophysics, 2002
- Swept impact seismic technique (SIST)Geophysics, 1996
- Walk-away VSP using drill noise as a sourceGeophysics, 1995
- The use of drill-bit energy as a downhole seismic sourceGeophysics, 1991