Performance of SLA and DMLS 3D Printed Ka-Band Resonators with Integrated Coaxial Launchers
Authors:
- 4 April 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 338-341
Abstract
A design and two different manufactured and measured components of a cavity resonator are discussed. The design process focuses on rapid prototyping in monolithic printing technologies in Direct Metal Laser Sintering (DMLS) and Stereolithography (SLA) with post-finished copper plating, and highlights the current size constraints and limitations of these two methods. The designs utilize self-supporting air-filled 3D printed rectangular coaxial lines, and a large number of release holes. These holes, also referred to as escape holes, are positioned and sized to allow for un-sintered material in DMLS to be released, while keeping spurious radiation low. For SLA devices, they aid flow of the copper and therefore more uniform plating. The unloaded quality factor (Q 0 ) of the final designs in DMLS and SLA are compared, with SLA maintaining a high Q 0 of >2000. The comparative behaviours in multiple fabricated models are used to examine the manufacturing impact of copper plating, and the surface quality of copper plated SLA and current commercially available copper alloy DMLS.Keywords
Funding Information
- Lockheed Martin Corporation (MRA17-003-RPP026)
This publication has 9 references indexed in Scilit:
- 3D Printed Spherical Cavity Resonator With Fine Tuning Using Nanomagnetic Thin Film2021
- Monolithic SLA-Based Capacitively-loaded High-Q Coaxial Resonators and Bandpass Filters2021
- Monolithically 3-D Printed Hemispherical Resonator Waveguide Filters With Improved Out-of-Band RejectionsIEEE Access, 2018
- Design of a Compact 3D Printed Coaxial Filter2018
- Monolithic 3-D Printed Spherical-Resonator-Based Olympic-Topology Bandpass Filters2018
- Compact doublet structure for Quasi-elliptical filters using stereolitographic 3D printing2017
- 3-D printed lightweight microwave waveguide devices2016
- $Ka$-Band Miniaturized Quasi-Planar High-$Q$ ResonatorsIEEE Transactions on Microwave Theory and Techniques, 2007
- K and Ka-Band silicon micromachined evanescent mode resonators2007