Study on the Unbalanced Fault Dynamic Characteristics of Eccentric Motorized Spindle considering the Effect of Magnetic Pull
Open Access
- 1 January 2021
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Abstract
Unbalanced fault is the most common fault of high‐speed motorized spindle, which is the main factor affecting the machining accuracy of high‐speed spindle. Due to the unbalanced magnetic pull produced by the air gap eccentricity of the stator and rotor, the unbalanced vibration of the motorized spindle will be further aggravated. In order to explore the dynamic behavior and motion law of the unbalanced fault motorized spindle under the eccentric state, a dynamic model of the unbalanced fault of the high‐speed motorized spindle considering the unbalanced magnetic pull was established. Taking the eccentric motorized spindle customized by the research group as the research object, the dynamic model is established, simulated, and analyzed, and the response change law of motorized spindle under the effect of different speed, unbalance, and air gap is obtained. The simulation results show that the unbalanced magnetic pull caused by static eccentricity will increase the unbalanced vibration of motorized spindle, and the unbalanced vibration will also increase with the increase of static eccentricity. The vibration caused by unbalanced magnetic pull does not increase with the increase of rotating speed. In frequency‐domain analysis, when there is unbalanced magnetic pull, the peak appears at 0 Hz, and the amplitude of fundamental frequency vibration will increase with the increase of eccentricity. The experimental results show that the greater the eccentricity is, the greater the unbalance vibration of the motorized spindle is. The experimental results are consistent with the simulation results, which further verify the accuracy of the model. The research results lay a theoretical basis for fault analysis and diagnosis of coupling fault motorized spindle.Keywords
Funding Information
- National Natural Science Foundation of China (51805337)
- Ministry of Education of the People's Republic of China
- Northeastern University (VCAME202008)
- Department of Education of Liaoning Province (lnjc202010)
This publication has 18 references indexed in Scilit:
- Investigation of the orbit-spinning behaviors of the outer ring in a full ceramic ball bearing-steel pedestal system in wide temperature rangesMechanical Systems and Signal Processing, 2021
- Stator-Winding Incipient Shorted-Turn Fault Detection for Motor System in Motorized Spindle Using Modified Interval ObserversIEEE Transactions on Instrumentation and Measurement, 2020
- Sommerfeld Effect and Unbalanced Response Analysis in Single Disk Rotor System with Eccentric Mass Considering Induction Motor ModelJournal of Mechanical Engineering, 2020
- Nonlinear modeling, dynamics, and chaos in a large deflection model of a rotor–disk–bearing system under geometric eccentricity and mass unbalanceActa Mechanica, 2019
- Analytical calculation of magnetic field in surface-mounted permanent-magnet machines with air-gap eccentricityCOMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2019
- Vibration response characteristics of a dual-rotor with unbalance-misalignment coupling faults: Theoretical analysis and experimental studyMechanism and Machine Theory, 2018
- Dynamic stability and nonlinear vibration analysis of a rotor system with flexible/rigid bladesMechanism and Machine Theory, 2016
- Dynamics Analysis of Unbalanced Motorized Spindles Supported on Ball BearingsShock and Vibration, 2016
- A four degrees-of-freedom model for a misaligned electrical rotorJournal of Sound and Vibration, 2015
- Investigation on stator vibration characteristics under air-gap eccentricity and rotor short circuit composite faultsJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2014