Development of Greener D-Metal Inorganic Crosslinkers for Polymeric Gels Used in Water Control in Oil and Gas Applications
Open Access
Abstract
Crosslinkable polymers, such as polyacrylamide (PAM), are widely applied for water control in oil and gas reservoirs. Organic and inorganic crosslinkers are used to formulate a gel with PAM. Although chromium has a high level of toxicity, it has been implemented as an effective crosslinker combined with carboxylates because of the controllability of crosslinking time at low temperatures. The objective of this work was to develop greener d-metal inorganic crosslinkers based on cobalt, copper, and nickel to replace chromium for application at reservoir conditions. The obtained results showed that the gelation chemistry of the developed systems depends on the metal charge density. The gelation of PAM with d-metals depends on pH and temperature for low- and high-charge density, respectively. Cobalt (II) acetate (CoAc) was effective at high temperatures (130–150 °C) and forms (4% CoAc + 9%PAM) stable, and strong gels at a pH > 7 with a storage modulus exceeding 4300 Pa. However, Nickel Acetate and Cupper Acetate formed stable weak gels at low temperatures (50–70 °C) and a pH > 6 and gel decomposition was observed upon increasing the temperature. The developed formulations were compatible with low-salinity water (1000 ppm NaCl).Keywords
Funding Information
- Qatar National Research Fund (NPRP10-0125-170240)
This publication has 38 references indexed in Scilit:
- Polymeric formulations used for loss circulation materials and wellbore strengthening applications in oil and gas wells: A reviewJournal of Petroleum Science and Engineering, 2019
- Stable Silica Nanofluids of an Oilfield Polymer for Enhanced CO2 Absorption for Oilfield ApplicationsEnergy & Fuels, 2018
- Studying the Effectiveness of Polyacrylamide (PAM) Application in Hydrocarbon Reservoirs at Different Operational ConditionsEnergies, 2018
- Study on a Novel Gelled Foam for Conformance Control in High Temperature and High Salinity ReservoirsEnergies, 2018
- Capillary breakup extensional rheometry of associative and hydrolyzed polyacrylamide polymers for oil recovery applicationsJournal of Applied Polymer Science, 2018
- Synthesis of a Ca/Na-aluminosilicate from kaolin and limestone and its use for adsorption of CO 2Journal of Environmental Chemical Engineering, 2016
- Influence of strong preformed particle gels on low permeable formations in mature reservoirsPetroleum Science, 2016
- Gelation of a Water-Shutoff Gel at High Pressure and High Temperature: Rheological InvestigationSPE Journal, 2015
- Effects of Fracture and Matrix on Propagation Behavior and Water Shut-off Performance of a Polymer GelEnergy & Fuels, 2015
- Gelation Study on a Hydrophobically Associating Polymer/Polyethylenimine Gel System for Water Shut-off TreatmentEnergy & Fuels, 2015