Battery-utility interface using soft switched ac link supporting low voltage ride through
Authors:
- 1 September 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23293721,p. 2606-2613
Abstract
In this paper, a novel soft switched high frequency AC link converter is proposed for use as a battery utility interface. The proposed configuration uses 10 bidirectional switches interfacing with an AC link consisting of an inductor and a parallel capacitance. The capacitance produces soft turn off in all operating conditions, and turn on always occurs with zero voltage. This converter has several significant advantages such as: high efficiency, light weight, low cost, very short power reversal time and the low voltage ride through (LVRT) capability. These characteristics make this converter an outstanding option for the battery-utility interface. Utility scale battery systems are being developed to improve grid stability, provide peaking power, and to improve the penetration of renewable energy sources. In order to provide the required grid stabilization, power converters which can switch in a few milliseconds from charging batteries to supplying power to the electric grid are required, and this must be done at low cost with high powered converters. The AC link converter proposed is capable of such rapid switching speeds, due to its high frequency of internal operation. Power reversal speed is only limited by the resonance period of the input/output filters, which have low per unit reactance due to the current sourced nature of the converter and its high frequency of internal operation, which is made possible by the fully soft switched converter. Power reversal times of less than 0.5 ms are demonstrated through simulation. Another important factor in the grid stability is low voltage ride through capability. In this paper, it will be shown that our proposed converter has this capability. Both simulations and experimental results will be included in this paper.Keywords
This publication has 10 references indexed in Scilit:
- Modern solutions for industrial matrix-converter applicationsIEEE Transactions on Industrial Electronics, 2002
- Lead–acid battery energy-storage systems for electricity supply networksJournal of Power Sources, 2001
- Energy, environment, and advances in power electronicsIEEE Transactions on Power Electronics, 2000
- A fuzzy-controlled active front-end rectifier with current harmonic filtering characteristics and minimum sensing variablesIEEE Transactions on Power Electronics, 1999
- Active Filter System ImplimentationIEEE Industry Applications Magazine, 1998
- A load commutated inverter-fed induction motor drive system using a novel DC-side commutation circuitIEEE Transactions on Industry Applications, 1994
- Evaluation of modern power semiconductor devices and future trends of convertersIEEE Transactions on Industry Applications, 1992
- The resonant DC link converter-a new concept in static power conversionIEEE Transactions on Industry Applications, 1989
- A versatile power converter for high-frequency link systemsIEEE Transactions on Power Electronics, 1988
- Recent progress in the development in solid-state AC motor drivesIEEE Transactions on Power Electronics, 1988