Interaction of Silver/Palladium Electrodes with Lead‐and Bismuth‐Based Electroceramics
Authors:
- 1 February 1993
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 76 (2) , 474-480
Abstract
In this study the phase relations between Pd or 70Ag/30Pd electrode systems with commercially important Bi‐or Pb‐based oxides were determined to establish the conditions under which detrimental interfacial chemical reactions may occur. For the reaction of Pd with Bi compounds, PdBi 2 O 4 formation was observed if the reaction proceeded at temperatures less than 835°C. At higher temperatures a Pd (Bi) alloy formed containing the maximum solubility of the Bi, i.e., 16 at.%. For the reaction of Pd with Pb compounds, a Pd (Pb) alloy formed which in all instances exhibited the maximum solubility of the Pb, i.e., 14 at.%. These reactions had an adverse effect on the local stoichiometry and composition of the dielectric, causing depletion of Bi or Pb. Studies on commercial capacitor dielectrics from DuPont (X7R and Z5U formulations) and Pb (Mg 1/3 Nb 2/3 )O 3 showed that the use of Pd electrodes decreased the dielectric constant substantially, which was due to the formation of a low permittivity phase in series connectivity with the unaltered dielectric.Keywords
This publication has 4 references indexed in Scilit:
- Interaction of Ag/Pd Metallization with Lead and Bismuth Oxide‐Based Fluxes in Multilayer Ceramic CapacitorsJournal of the American Ceramic Society, 1992
- Electrode‐Based Causes of Delaminations in Multilayer Ceramic CapacitorsJournal of the American Ceramic Society, 1989
- Subsolidus Phase Relations in the System Pd-Ag-O and Application to Multilayer Ceramic Capacitor ElectrodesAdvanced Ceramic Materials, 1988
- Electrode and materials problems in ceramic capacitorsFerroelectrics, 1976