Damage Analysis of Third-Generation Advanced High-Strength Steel Based on the Gurson–Tvergaard–Needleman (GTN) Model
Open Access
Abstract
The third generation of advanced high-strength steels (AHSS) brought attention to the steel and automotive industries due to its good compromise between formability and production costs. This work evaluated a third-generation AHSS (USS CR980XG3TM) through microstructural and X-ray diffraction (XRD) analyses, uniaxial tensile and plane-strain tension testing, and numerical simulations. The damage behavior of this steel is described with the Gurson–Tvergaard–Needleman (GTN) model using an identification procedure based on the uniaxial tensile and initial microvoids data. The microstructure of the CR980XG3TM steel is composed of ferrite, martensite–austenite islands, and retained austenite with a volume fraction of 12.2%. The global formability of the CR980XG3TM steel, namely the product of the uniaxial tensile strength and total elongation values, is 24.3 GPa%. The Lankford coefficient shows a weak initial plastic anisotropy of the CR980XG3TM steel with the in-plane anisotropy close to zero (−0.079) and the normal anisotropy close to unity (0.917). The identified GTN parameters for the CR980XG3TM steel provided a good forecast for the limit strains defined according to ISO 12004-2 standard from the uniaxial tensile and plane-strain tension data.Keywords
This publication has 39 references indexed in Scilit:
- Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomographyMaterials Science and Engineering: A, 2014
- Quenching and Partitioning Steel Heat TreatmentMetallography, Microstructure, and Analysis, 2013
- Influence of the Constitutive Flow Law in FEM Simulation of the Radial Forging ProcessJournal of Engineering, 2013
- Development of 3rd generation AHSS with medium Mn content alloying compositionsMaterials Science and Engineering: A, 2013
- Third generation of AHSS with increased fraction of retained austenite for the automotive industryArchives of Civil and Mechanical Engineering, 2012
- Identification of GTN model parameters by application of response surface methodologyProcedia Engineering, 2011
- Initiation and growth of damage in a dual-phase steel observed by X-ray microtomographyActa Materialia, 2008
- Carbon partitioning into austenite after martensite transformationActa Materialia, 2003
- Continuum damage mechanics: Present state and future trendsNuclear Engineering and Design, 1987
- Analysis of the cup-cone fracture in a round tensile barActa Metallurgica, 1984