The influence of the modifying elements on the microstructure, mechanical, and deformation properties of aluminum alloys
Open Access
- 16 December 2022
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 9
Abstract
In the current work, the standard A242 aluminum cast alloy is modified using the stir casting method with titanium (Ti) (0.5% wt.) and boron (B) (0.1% wt.) modifiers. Polarized optical and scanning electron microscopy were utilized to examine the A242 base microstructure, and A242 + TiB modified alloys; the results revealed that the modified A242 + TiB alloy was refined by 13.5 times more than the as-cast alloy. The mechanical properties were investigated experimentally using compression test in addition to the hardness test; the results revealed that the ultimate compressive strength of the A242 + TiB modified alloy was increased by 9.0% more than those of the A242 standard alloy. Moreover, the yield stress was enhanced by 40% at room temperature and 20% at 250 °C. The dynamic properties were studied using a free vibration impact test to study the modifiers’ effect on the dynamic behavior. The grain refinement notably impacted the damping capacity; due to the as-cast inhomogeneity, the conventional alloy A242 exhibited a greater FRF than the modified alloy A242 + TiB. The modified alloy displayed fewer resonance peaks due to grain refinement and excellent intermetallic phase distribution. The simulation process of the investigated alloys was performed using ABAQUS finite element software to predict the deformation behavior under different temperatures. The FE results showed that the modified alloy was more resistant to deformation by 9.1% than the reference alloy, A242, at room temperature and 7.6% at 250 °C, which agreed with the experimental findings.Keywords
This publication has 47 references indexed in Scilit:
- The Effect of Al-5Ti-1B on Microstructure and Mechanical Properties of Al-12Si-xFe AlloyMaterials and Manufacturing Processes, 2012
- The Evolution of Heat Treatment on the Tensile Properties of Na-Modified Al-Mg2Si In Situ CompositeAdvanced Materials Research, 2011
- Grain Refinement in Alloys: Novel Approaches2011
- Improved mechanical properties in cast Al–Si alloys by combined alloying of Fe and CuMaterials Science and Engineering: A, 2010
- Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystalsInternational Journal of Plasticity, 2008
- Boron-based refiners: Advantages in semi-solid-metal casting of Al–Si alloysMaterials Science and Engineering: A, 2007
- Prediction of grain size of Al–7Si Alloy by neural networksMaterials Science and Engineering: A, 2005
- Microstructure of Al3Sc with ternary transition-metal additionsMaterials Science and Engineering: A, 2002
- Strength and fracture of aluminum alloysMaterials Science and Engineering: A, 2000
- A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloysActa Metallurgica et Materialia, 1993