The Mechanics of Friction-spinning
Authors:
- 1 January 1987
- journal article
- research article
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 78 (4) , 234-254
Abstract
Friction-spinning of staple-fibre yarns involves the supply of separated fibres to a torque zone within a shear field and the removal of yarn from it. The shear field is created by the movement of one or more solids of revolution. Usually, two parallel cylinders rotating in the same direction and in close proximity are used to create the desired shear field in the vicinity of the nip line. At least one of the cylinders is perforated, and air-flow into the cylinder causes force reactions to be generated between the yarn and the cylinders. The solid surfaces move in opposite directions in the vicinity of the yarn, and the drag forces acting on the yarn create a torque. The magnitude and pattern of the air-flow strongly affect the way in which fibres become assembled on the forming yarn, as well as the torque produced. The structure and performance of the yarn are very dependent on these factors. The yarn from first-generation machines is weak because of poor fibre structure, and this paper sets out some of the elements involved in the hope that a better understanding of the phenomena might speed the development of the process.Keywords
This publication has 2 references indexed in Scilit:
- Comparison of Properties of Cotton Yarns Produced by the DREF-3, Ring, and Open-End Spinning MethodsTextile Research Journal, 1985
- VIII. Stability of a viscous liquid contained between two rotating cylindersPhilosophical Transactions of the Royal Society A, 1923