Fabrication of Macrochannelled‐Hydroxyapatite Bioceramic by a Coextrusion Process
- 1 October 2002
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 85 (10) , 2578-2580
Abstract
A coextrusion process was used to fabricate macrochannelled hydroxyapatite (HA). To improve the powder characteristics, the HA powder was calcined at 900°C in air for 1 h. A feedrod composed of HA (shell) and carbon black (core) was coextruded at 120°C through a symmetric 8:1 square reduction die. After the first coextrusion, the individual pieces were bundled, warm‐pressed, and then coextruded again. After removing the binder, the billet was sintered at 1350°C for 1h in air. Uniform, 27 vol% macrochannels with a diameter of 270 μm were formed in the dense HA through removal of the carbon black. The compressive strength of the test specimens was strongly dependent on the macrochannel direction due to the stress concentrations related to the macrochannel geometry.Keywords
This publication has 12 references indexed in Scilit:
- Fabrication and characterization of porous hydroxyapatite granulesBiomaterials, 1996
- Some physico-chemical aspects of hydroxylapatiteJournal of Materials Science, 1996
- Control of pore geometry on influencing the mechanical property of porous hydroxyapatite bioceramicJournal of Materials Science Letters, 1996
- Granulates based on calcium phosphate with controlled morphology and porosity for medical applications: physico-chemical parameters and production techniqueBiomaterials, 1994
- DENSE HYDROXYAPATITE1993
- Fracture of Brittle Solids1993
- Bioceramics: From Concept to ClinicJournal of the American Ceramic Society, 1991
- Porous, Block Hydroxyapatite as an Interpositional Bone Graft Substitute in Orthognathic SurgeryPlastic and Reconstructive Surgery, 1989
- Apatites in biological systemsProgress in Crystal Growth and Characterization, 1981
- Hydroxyapatite formed from Coral Skeletal Carbonate by Hydrothermal ExchangeNature, 1974