Use of Carbon Additives towards Rechargeable Zinc Slurry Air Flow Batteries
Open Access
Abstract
The performance of redox flow batteries is notably influenced by the electrolyte, especially in slurry-based flow batteries, as it serves as both an ionic conductive electrolyte and a flowing electrode. In this study, carbon additives were introduced to achieve a rechargeable zinc slurry flow battery by minimizing the zinc plating on the bipolar plate that occurs during charging. When no carbon additive was present in the zinc slurry, the discharge current density was 24 mA∙cm−2 at 0.6 V, while the use of carbon additives increased it to up to 38 mA∙cm−2. The maximum power density was also increased from 16 mW∙cm−2 to 23 mW∙cm−2. Moreover, the amount of zinc plated on the bipolar plate during charging decreased with increasing carbon content in the slurry. Rheological investigation revealed that the elastic modulus and yield stress are directly proportional to the carbon content in the slurry, which is beneficial for redox flow battery applications, but comes at the expense of an increase in viscosity (two-fold increase at 100 s−1). These results show how the use of conductive additives can enhance the energy density of slurry-based flow batteries.Keywords
Funding Information
- H2020 Marie Skłodowska-Curie Actions (765289)
This publication has 45 references indexed in Scilit:
- All-solid-state Al–air batteries with polymer alkaline gel electrolyteJournal of Power Sources, 2014
- Maximizing Energetic Efficiency in Flow Batteries Utilizing Non-Newtonian FluidsJournal of the Electrochemical Society, 2014
- Non-aqueous carbon black suspensions for lithium-based redox flow batteries: rheology and simultaneous rheo-electrical behaviorPhysical Chemistry Chemical Physics, 2013
- Advanced zinc-air batteries based on high-performance hybrid electrocatalystsNature Communications, 2013
- Improvement in self-discharge of Zn anode by applying surface modification for Zn–air batteries with high energy densityJournal of Power Sources, 2013
- Effect of Adding Carbon Black to a Porous Zinc Anode in a Zinc-Air BatteryJournal of the Electrochemical Society, 2013
- High Pressure Mixing Rheology of Drilling FluidsIndustrial & Engineering Chemistry Research, 2012
- Semi‐Solid Lithium Rechargeable Flow BatteryAdvanced Energy Materials, 2011
- Zinc morphology in zinc–nickel flow assisted batteries and impact on performanceJournal of Power Sources, 2011
- Carbopol gels: Elastoviscoplastic and slippery glasses made of individual swollen spongesJournal of Non-Newtonian Fluid Mechanics, 2007