Evaluation of the Aging Effect on the Microstructure of Co-28Cr-6Mo-0.3C Alloy: Experimental Characterization and Computational Thermodynamics
Open Access
Abstract
In the current research, we studied the role of the solution treatment and aging on the microstructure of a Co–28Cr–5Mo–0.3C alloy. We used metallographic observations, scanning electron microscopy (SEM), and hardness measurements for the evaluations. We also made a comparison between the phase equilibrium calculated with Thermo-Calc, using TCFE8 and TCNI8 thermodynamic databases and experimental findings. The experimental results showed that the transformation of the metastable FCC phase to the HCP phase during aging was extremely sensitive to the solution treatment prior to aging. The effect of the increase in the solution temperature and time was detectable through promotion of the martensitic transformation during quenching in which HCP1 (straight bands) and HCP2 (lamellar-type constitution) phases had developed. In contrast, a low solution temperature and time caused most of the primary carbides to remain in an undissolved condition in the matrix; therefore, during aging, no sign of the FCC to HCP1 (straight bands) phase transformation could be observed. However, we observed the formation of the HCP2 phase (lamellar-type constitution) at the grain boundaries. In addition, the X-ray diffraction pattern indicated that the sample solution treated at lower temperatures and shorter times had a stronger martensitic transformation during aging compared to the sample solution treated at higher temperatures and longer times. Hardness measurements confirmed the results. Thermodynamical calculations showed that an agreement existed between the experiments and calculations. We also discuss the results from the TCFE8 and TCNI8 databases.Keywords
This publication has 17 references indexed in Scilit:
- Characterisation of nanoscale carbide precipitation in as-cast Co–Cr–W-based dental alloysJournal of Materials Chemistry B, 2016
- Effects of carbon concentration on microstructure and mechanical properties of as-cast nickel-free Co–28Cr–9W-based dental alloysMaterials Science and Engineering: C, 2014
- Influence of microstructure of HC CoCrMo biomedical alloys on the corrosion and wear behaviour in simulated body fluidsTribology International, 2011
- Effect of isothermal aging on the microstructural evolution of Co–Cr–Mo–C alloyMaterials Science and Engineering: A, 2010
- Isothermal Phase Transformation in Biomedical Co-29Cr-6Mo Alloy without Addition of Carbon or NitrogenMetallurgical and Materials Transactions A, 2010
- Microstructural evolution during isothermal aging and strain-induced transformation followed by isothermal aging in Co-Cr-Mo-C alloy: A comparative studyMaterials Science and Engineering: A, 2010
- Martensitic Transformation in a Cast Co-Cr-Mo-C AlloyMetallurgical and Materials Transactions A, 2007
- Role of aging on the martensitic transformation in a cast cobalt alloyScripta Materialia, 2001
- Athermal ε-martensite in a Co–Cr–Mo alloy: grain size effectsMaterials Letters, 1999
- Effect of alloy preheating on the mechanical properties of as-cast Co-Cr-Mo-C alloysMetallurgical and Materials Transactions A, 1999