Current References Limitation Method Considering Voltage and Current Maximums for STATCOMs Providing Simultaneously Reactive Power and Current Harmonics
- 24 January 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (2) , 2559-2575
Abstract
The present paper focuses the analysis on a Static Synchronous Compensator (STATCOM) that operates simultaneously providing reactive power and several current harmonics of different frequencies (active power filter or active impedance functionalities). Being more specific, this paper proposes a general limitation method that reduces the current references of the STATCOM, whenever the current or voltage limit of the converter is exceeded. In a realistic operation scenario, the STATCOM’s operator may ask for certain reactive power and harmonic current reference signals and depending on the actual grid voltage conditions (unbalances and harmonics), the required converter voltage and current may exceed their limit. Consequently, the proposed limitation method protects the STATCOM system from malfunctioning when the voltage limit is exceeded and from damages when the current limit is exceeded. Hence, the paper first proposes a limitation method oriented to a STATCOM that operates solely exchanging reactive power. Secondly, the limitation method is generalized for a STATCOM that controls reactive power as well as several current harmonics. Then, simulation and experimental results are provided to validate the proposed limitation method, under a rich variety of working conditions. Finally, a conceptual analysis of the method is carried out confronting it against several possible limitation alternatives.Keywords
Funding Information
- Project “MISIONES: FLEXENER” of the Spanish Institution Centro para el Desarrollo Tecnológico Industrial
- Ministerio de Ciencia e Innovación
This publication has 30 references indexed in Scilit:
- An Analytical Method to Obtain Maximum Allowable Grid Support by Using Grid-Connected ConvertersIEEE Transactions on Sustainable Energy, 2016
- Synchronous Instability Mechanism of P-f Droop-Controlled Voltage Source Converter Caused by Current SaturationIEEE Transactions on Power Systems, 2016
- A Current Limiting Strategy to Improve Fault Ride-Through of Inverter Interfaced Autonomous MicrogridsIEEE Transactions on Smart Grid, 2016
- Online Reference Limitation Method of Shunt-Connected Converters to the Grid to Avoid Exceeding Voltage and Current Limits Under Unbalanced Operation—Part I: TheoryIEEE Transactions on Energy Conversion, 2015
- Virtual-Impedance-Based Control for Voltage-Source and Current-Source ConvertersIEEE Transactions on Power Electronics, 2014
- Reactive Power Control for Distributed Generation Power Plants to Comply With Voltage Limits During Grid FaultsIEEE Transactions on Power Electronics, 2014
- Virtual RC Damping of LCL-Filtered Voltage Source Converters With Extended Selective Harmonic CompensationIEEE Transactions on Power Electronics, 2014
- Active and Reactive Power Strategies With Peak Current Limitation for Distributed Generation Inverters During Unbalanced Grid FaultsIEEE Transactions on Industrial Electronics, 2014
- A comparison of high-power converter topologies for the implementation of FACTS controllersIEEE Transactions on Industrial Electronics, 2002
- New trends in active filters for power conditioningIEEE Transactions on Industry Applications, 1996