Role of ultrasonic shot peening on microstructure, hardness and corrosion resistance of nitrogen stabilised stainless steel without nickel
- 28 June 2019
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (9) , 096578
Abstract
The influence of Ultrasonic Shot Peening (USP) was investigated on microstructure, hardness and corrosion behavior of a nitrogen stabilised stainless steel without nickel in simulated body fluid (SBF). Specimens of 11.5 mm diameter and 4.5 mm thickness were subjected to USP with 2 and 3 mm diameter shots of hard steel, for time periods of 30, 60, and 120 seconds, separately. The hardness and roughness of the surface were found to increase from the USP treatment. The microstructure of the specimens in the Un-USP and different USP treated conditions was examined using optical microscope, SEM and TEM. There was a drastic reduction in the size of initial grains of 36-micron size to fine grains of 15 nm in surface region from the USP treatment. There is progressive change in microstructure, from multidirectional slip to single direction and finally diaappear, from USP treated surface towards interior, up to certain depth, depending on the shot diameter and duration of USP. Corrosion resistance of the specimens in different USP treated conditions was studied in SBF and was found to increase from USP with shots of 3 mm diameter for 30 seconds and with shots of 2 mm diameter for 60 seconds. There was decrease in corrosion resistance from longer duration of USP treatment due to localised surface damage.Keywords
This publication has 36 references indexed in Scilit:
- Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steelsActa Materialia, 2010
- Nickel-free austenitic stainless steels for medical applicationsScience and Technology of Advanced Materials, 2010
- Effects of nitrogen on deformation-induced martensitic transformation in metastable austenitic Fe–18Cr–10Mn–N steelsScripta Materialia, 2008
- The corrosion behavior of Fe–10Cr nanocrystalline coatingElectrochimica Acta, 2006
- Effect of surface nanocrystallization on friction and wear properties in low carbon steelMaterials Science and Engineering: A, 2003
- Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peeningMaterials Science and Engineering: A, 2000
- Surface nanocrystallization of iron induced by ultrasonic shot peeningNanostructured Materials, 1999
- High Nitrogen Steels. Nickel Free High Nitrogen Austenitic Steels.ISIJ International, 1996
- Allergy to coined money: Nickel contact dermatitis in cashiersJournal of the American Academy of Dermatology, 1991
- Scherrer after sixty years: A survey and some new results in the determination of crystallite sizeJournal of Applied Crystallography, 1978