Online monitoring of the curing of adhesives with a miniaturised interdigital sensor using impedance spectroscopy
- 17 September 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 32 (7) , 772-786
Abstract
Monitoring adhesives during manufacturing and their lifetime has become increasingly important due to the variety of materials and applications. Impedance spectroscopy is a suitable method for online monitoring of the curing process. We present a miniaturised interdigital structure to monitor the curing process of the adhesives using impedance spectroscopy. Compared to other sensors, our sensor is ultrathin, so that it disappears in the adhesive joint. Therefore, it can remain in the joint and be used for lifetime monitoring. In addition it is suitable for thin adhesive layers due to its fine grid. We demonstrate that the impedance of the sensor embedded in the adhesive gives insight into the curing mechanisms. Therefore monitoring of a dispersion and an epoxy is shown. In addition, the curing cycles can be reliably controlled using this monitoring method. The permittivity of the adhesives is extracted from the impedance measurements, applying analytical models of the electrical field of the interdigital structure.Keywords
This publication has 31 references indexed in Scilit:
- Exploring equivalence of information from dielectric and calorimetric measurements of thermoset cure—a model for the relationship between curing temperature, degree of cure and electrical impedancePolymer, 2005
- Non-Isothermal in Situ Dielectric Cure Monitoring for Thermosetting Matrix CompositesJournal of Composite Materials, 2004
- Analytical evaluation of the interdigital electrodes capacitance for a multi-layered structureSensors and Actuators A: Physical, 2004
- Health monitoring of composite repairs and joints using optical fibresComposite Structures, 2002
- Approximate expressions for the capacitance and electrostatic potential of interdigitated electrodesSensors and Actuators A: Physical, 2002
- Inspection of composite and metal adhesive bonds with an electrochemical sensorJournal of Adhesion Science and Technology, 2002
- Latex film formationCurrent Opinion in Colloid & Interface Science, 1997
- Theoretical and experimental determination of cell constants of planar-interdigitated electrolyte conductivity sensorsSensors and Actuators B: Chemical, 1995
- Use of Complex Impedance To Monitor the Progress of Reactions in Epoxy/Amine Model SystemsMacromolecules, 1994
- The Role of Boundary Layer Capacitance at Blocking Electrodes in the Interpretation of Dielectric Cure Data in AdhesivesThe Journal of Adhesion, 1985