The generation of nanosecond pulses at C-band region with titanium dioxide as a saturable absorber
Authors:
- S OmarSOS Omar
- Nf ZulkipliNZNf Zulkipli
- Z JusohZJZ Jusoh
Open Access
- 1 October 2021
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2075 (1) , 012013
Abstract
A passive mode-locked in an erbium-doped fiber laser with titanium dioxide (TiO2) film as a saturable absorber (SA) has been successfully demonstrated. The film is fabricated using a liquid phase exfoliation, which offers a simple and low-cost method. The self-starting mode-locked was created by inserting a 200-meter-long single-mode fiber into the laser cavity to balance the nonlinearity and dispersion of the cavity. The pulses operate stably at a central wavelength of 1560 nm. The pulse repetition rate was almost fixed at 988 kHz at a tuneable pump power from 145.83 mW to 187.04 mW. The repetition rate shows excellent stability with a signal-to-noise ratio (SNR) of 69 dB whilst the pulse width was virtually constant at 230 ns. The maximum output power was measured at 2.17 mW, eliciting maximum pulse energy of 2.19 nJ. This experiment demonstrates that stable mode-locked pulsed can be generated using TiO2-SA.Keywords
This publication has 13 references indexed in Scilit:
- Titanium Dioxide (TiO 2 ) film as a new saturable absorber for generating mode-locked Thulium-Holmium doped all-fiber laserOptics & Laser Technology, 2017
- WS_2 as a saturable absorber for ultrafast photonic applications of mode-locked and Q-switched lasersOptics Express, 2015
- Titanium Dioxide Nanomaterials for Photovoltaic ApplicationsChemical Reviews, 2014
- Nanosecond soliton pulse generation by mode-locked erbium-doped fiber laser using single-walled carbon-nanotube-based saturable absorberApplied Optics, 2012
- Ultra-short pulse generation by a topological insulator based saturable absorberApplied Physics Letters, 2012
- Nanosecond-pulsed erbium-doped fiber lasers with graphene saturable absorberOptics Communications, 2012
- Saturable absorber at 940 nm using single wall carbon nanotubes deposited by vertical evaporation techniqueOptik, 2011
- Nonlinear optical response of titanium oxide nanostructured thin filmsThin Solid Films, 2009
- Titanium Dioxide Nanomaterials: Synthesis, Properties, Modifications, and ApplicationsChemical Reviews, 2007
- Semiconductor saturable absorber mirrors (SESAM's) for femtosecond to nanosecond pulse generation in solid-state lasersIEEE Journal of Selected Topics in Quantum Electronics, 1996