Two-Level Excitation Current Driver to Reduce the Driving Power of an Electromagnetic Contactor
Open Access
- 28 February 2024
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 13 (5) , 916
Abstract
As the capacity of the electrical system increases, so does the capacity of the electromagnetic contactor (MC). This increases the burden on the MC drive, which consumes unnecessary power in the system. MC is characterized by different initial starting-operating currents and holding currents to maintain contact. However, the operating voltage is constant regardless of the operating state. The initial starting current is considerably larger than that required to maintain contact. However, once the electromagnetic contactor is in the closed state, the current to maintain the contact is relatively small compared to the initial starting operating currents. Therefore, this study proposes two types of two-level excitation-current type MC drives that can reduce the drive power by employing features that have different conditions depending on the operating state of the MC. The overall drive power is reduced by applying different excitation currents based on the operating state. The controller and system proposed in this study were simulated using Powersim 9.1 (PSIM), and the feasibility was verified by manufacturing an analog-type driver using LM2576 and a digital-type driver using an MCU. The simulation and experimental results provide significant data for verifying the high performance and reliability of the proposed controller and system.Keywords
Funding Information
- Honam University (2022-0206)
This publication has 27 references indexed in Scilit:
- Electromechanical coupling of a 3.88 W harvester with circumferential step-size field: modeling, validation and self-powered wearable applicationsSmart Materials and Structures, 2024
- A Review on Hybrid Circuit Breakers for DC ApplicationsIEEE Open Journal of the Industrial Electronics Society, 2023
- Analysis, Design, and Optimization of a Novel Asymmetrical Bistable Short Mover Permanent Magnet Actuator for High-Voltage Circuit Breaker ApplicationActuators, 2022
- Performance comparison of electromagnetic generators based on different circular magnet arrangementsEnergy, 2022
- Research on Double Closed-Loop Control Strategy of Contactors Based on Flux Linkage ObserversIEEE Transactions on Industrial Electronics, 2021
- An Equivalent Circuit Analysis and Suspension Characteristics of AC Magnetic Suspension Using Magnetic Resonant CouplingActuators, 2020
- Optimization design and energy-saving control strategy of high power dc contactorInternational Journal of Electrical Power & Energy Systems, 2020
- Energy-Efficient Eco-Friendly Zero-Holding-Energy Magnetic Contactor for Industrial and Vehicular ApplicationsIEEE Transactions on Vehicular Technology, 2020
- Characteristics Analysis and Design of a Novel Magnetic Contactor for a 220 V/85 AIEEE Transactions on Magnetics, 2013
- Dynamic model for AC and DC contactors – Simulation and experimental validationSimulation Modelling Practice and Theory, 2011