An Audio Distortion Dynamic Range Index for Evaluating the Performance of Audio Systems
Open Access
- 12 November 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (22) , 8022
Abstract
The dynamic range (DR) index lacking of an official definition leads to ambiguities in performance evaluation. The existing measurement methods of DR do not always match with the various actual application conditions, and some detailed distortion behavior of the device under test (DUT) is not extracted. In this paper, a new index for evaluating the DR performance of audio systems is proposed and validated, herein referred to as the audio distortion dynamic range (ADDR). It reduces the uncertainty of measurement conditions by an explicit definition and unifies the signal-to-noise ratio (SNR) and the signal-to-noise-and-distortion ratio (SINAD) indexes if under the same measurement condition. Moreover, to comprehensively reflect the impact of harmonic, spurious, and noise components on the DUT, the definitions of the traditional indexes based on classification of distorted components are replaced by the variable thresholds in the ADDR definition. Subsequently, the detailed steps of ADDR and the critical factors influencing its accuracy, are analyzed and then the optimized measurement conditions are given. Experiments based on simulated DUTs show the ADDR index can distinguish performance difference that the traditional indexes cannot distinguish, which proves it is an effective supplementary to the existing indexes in some real applications.Keywords
Funding Information
- National Key R&D Program of China (2017YFA0701200)
- National Natural Science Foundation of China (61973059, 61532007)
This publication has 18 references indexed in Scilit:
- An Observer-Based Adaptive Fourier Analysis [Tips & Tricks]IEEE Signal Processing Magazine, 2020
- MIRE: A Multitone Identification and Replacement Method for Multitone Spectral Test Without Requiring Coherent SamplingIEEE Transactions on Instrumentation and Measurement, 2019
- Observer-Based Recursive Sliding Discrete Fourier Transform [Tips & Tricks]IEEE Signal Processing Magazine, 2018
- A 106 dB A-Weighted DR Low-Power Continuous-Time $\Sigma \Delta $ Modulator for MEMS MicrophonesIEEE Journal of Solid-State Circuits, 2016
- Digital amplifier of 96 kHz PWM frequency with 91dB dynamic range and 0.13% THD+N at full modulationIEEE Transactions on Consumer Electronics, 2012
- Adaptive thresholding for high dual-tone signal instantaneous dynamic range in digital wideband receiver2010
- Novel adaptive IIR filter for frequency estimation and tracking [DSP Tips&TricksIEEE Signal Processing Magazine, 2009
- New Spectrum Leakage Correction Algorithm for Frequency Estimation of Power System SignalsIEEE Transactions on Instrumentation and Measurement, 2009
- Extension of Two-Signal Spurious-Free Dynamic Range of Wideband Digital Receivers Using Kaiser Window and Compensation MethodIEEE Transactions on Microwave Theory and Techniques, 2007
- A 102-dB spurious-free DR ΣΔ ADC using a dynamic dither schemeIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2000