Higher order mode damping in a five-cell superconducting rf cavity with a photonic band gap coupler cell
Open Access
- 1 August 2016
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 19 (8) , 081301
Abstract
We present a study of higher order mode (HOM) damping in the first multicell superconducting radio-frequency (SRF) cavity with a photonic band gap (PBG) coupler cell. Achieving higher average beam currents is particularly desirable for future light sources and particle colliders based on SRF energy-recovery linacs (ERLs). Beam current in ERLs is limited by the beam breakup instability, caused by parasitic HOMs interacting with the beam in accelerating cavities. A PBG cell incorporated in an accelerating cavity can reduce the negative effect of HOMs by providing a frequency selective damping mechanism, thus allowing significantly higher beam currents. The five-cell cavity with a PBG cell was designed and optimized for HOM damping. Monopole and dipole HOMs were simulated. The SRF cavity was fabricated and tuned. External quality factors for some HOMs were measured in a cold test. The measurements agreed well with the simulations.Keywords
Funding Information
- U.S. Department of Energy (DE-SC0009523, DE-SC0010075)
This publication has 17 references indexed in Scilit:
- Optimizing the configuration of a superconducting photonic band gap accelerator cavity to increase the maximum achievable gradientsPhysical Review Special Topics - Accelerators and Beams, 2014
- First High Power Test Results for 2.1 GHz Superconducting Photonic Band Gap Accelerator CavitiesPhysical Review Letters, 2012
- Superconducting Radio-Frequency Systems for High-β Particle AcceleratorsReviews of Accelerator Science and Technology, 2012
- Novel superconducting rf structure for ampere-class beam current for multi-GeV energy recovery linacsPhysical Review Special Topics - Accelerators and Beams, 2010
- Truncated photonic crystal cavities with optimized mode confinementJournal of Applied Physics, 2008
- Recirculating beam-breakup thresholds for polarized higher-order modes with optical couplingPhysical Review Special Topics - Accelerators and Beams, 2007
- Fabrication and cold test of photonic band gap resonators and accelerator structuresPhysical Review Special Topics - Accelerators and Beams, 2005
- Demonstration of a 17-GHz, High-Gradient Accelerator with a Photonic-Band-Gap StructurePhysical Review Letters, 2005
- Beam-breakup instability theory for energy recovery linacsPhysical Review Special Topics - Accelerators and Beams, 2004
- Simulation of photonic band gaps in metal rod lattices for microwave applicationsJournal of Applied Physics, 2002