Characterization of Shock Wave Damages in Explosion Welded Mo/Cu Clads
Open Access
Abstract
The shock wave damage during explosive welding has not been reported in a flyer Mo plate of the Mo/Cu clads. However, it would be an inevitable problem in group VI elements. This study was aimed to characterize the shock wave damage in the Mo plate, that is less brittle than a W plate, of explosive welded Mo/Cu clads. Cladding at low horizontal collision velocities leading to high collision angles was expected to enhance the shock wave damage, and the clads resulted in less elongation in bending tests. On the other hand, in the clads obtained at high horizontal collision velocities (HCVs) with low collision angles, their bending elongation increased significantly. The shock wave damage penetrated from the surface of a Mo plate to the Mo/Cu interface, and thus reducing thickness of a Mo plate of bending specimens increased bending plastic strain. The shock wave damage is associated with kinetic energy imparted to the flyer Mo plate, and thus loss of kinetic energy due to formation of an intermediate layer at the interface and reducing thickness of a flyer Mo plate would be very helpful for decrease of shock wave damage.Keywords
This publication has 25 references indexed in Scilit:
- Numerical and experimental modeling of jet formation during a high-velocity oblique impact of metal platesCombustion, Explosion, and Shock Waves, 2012
- Explosive Welding of Molybdenum/Copper Using Underwater Shock WaveMaterials Science Forum, 2012
- Underwater explosive welding of thin tungsten foils and copperJournal of Nuclear Materials, 2011
- Dissimilar material welding of rapidly solidified foil and stainless steel plate using underwater explosive welding techniqueJournal of Alloys and Compounds, 2009
- Control of energetic conditions by employing interlayer of different thickness for explosive welding of titanium/304 stainless steelJournal of Materials Processing Technology, 2008
- Plasma facing materials and components for future fusion devices—development, characterization and performance under fusion specific loading conditionsPhysica Scripta, 2006
- Review of recent works in development and evaluation of high-Z plasma facing materialsJournal of Nuclear Materials, 1999
- Design for quality explosive weldingJournal of Materials Processing Technology, 1992
- Swinging Wake Mechanism for Interface Wave Generation in Explosive Welding of MetalsJournal of Applied Mechanics, 1990
- The mechanics of wave formation in explosive weldingProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1967