The Minor Hysteresis Loop Under Rotating Magnetic Fields in Machine Laminations
Authors:
- 16 January 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 50 (4) , 2544-2553
Abstract
In rotating ac machines, the saturated flux density waveforms contain harmonics, which create minor hysteresis loops. The minor hysteresis loops in machine laminations constitute an additional loss which requires modifications in traditional core loss formulas. This causes a serious challenge in core loss estimation. The task becomes more competitive under rotating magnetic fields, where the minor loop behavior has not been investigated yet. This paper highlights the problem of harmonics in rotating fields and its effect on the core loss estimation. In addition, the behavior of minor loops under rotating fields is compared with the minor loops under pulsating fields. Measurements were carried out on a nonoriented silicon steel sample of M36G29 with different fundamental frequencies of interest to the industry, 60 Hz and 400 Hz, with consideration of the third harmonic at each frequency. A design of magnetizing test fixture based on an electromagnetic Halbach array is used to perform these measurements. Results are presented and discussed.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada
- Hydro-Québec
This publication has 21 references indexed in Scilit:
- The impact of rotating field on core loss estimation in electrical machine laminations2012
- Rotational core loss measurements in clockwise and counterclockwise directions2012
- Core Loss Modeling for Permanent-Magnet Motor Based on Flux Variation Locus and Finite-Element MethodIEEE Transactions on Magnetics, 2012
- Vector Magnetic Characteristic Analysis of a Surface Permanent Magnet Motor by Means of Complex E&S ModelingIEEE Transactions on Magnetics, 2012
- Test Specimen Shape Considerations for the Measurement of Rotational Core LossesIEEE Transactions on Energy Conversion, 2011
- Estimating rotational iron losses in an induction machineIEEE Transactions on Magnetics, 2003
- Potential for loss reductions in transformers through utilization of third-harmonic flux2003
- Power loss in electrical steel under elliptically rotating flux conditionsIEEE Transactions on Magnetics, 1996
- Losses influenced by third-harmonic flux in induction motorsIEEE Transactions on Energy Conversion, 1991
- Measurement of rotational power losses in silicon-Iron sheets using wattmeter methodIEEE Transactions on Magnetics, 1985