Dynamic Exergy Analysis of Heating Surfaces in a 300 MW Drum-Type Boiler
Open Access
Abstract
In the age of widespread renewable energy integration, coal-fired power plants are transitioning from a primary baseload role to a more flexible peak-shaving capacity. Under frequent load changes, the thermal efficiency will significantly decrease. In order to achieve efficient dynamic operation, this study proposes a comprehensive mechanical model of a 300 MW drum-type boiler. Based on the Modelica/DYMOLA platform, the multi-domain equations describing energy and mass balance are programmed and solved. A comprehensive evaluation of the energy transformation within the boiler’s heat exchange components was performed. Utilizing the principles of exergy analysis, this study investigates how fluctuating operational conditions impact the energy dynamics and exergy losses in the drum and heating surfaces. Steady-state simulation reveals that the evaporator and superheater units account for 81.3% of total exergy destruction. Dynamic process analysis shows that the thermal inertia induced by the drum wall results in a significant delay in heat transfer quantity, with a dynamic period of up to 5000 s. The water wall exhibits the highest total dynamic exergy destruction at 9.5 GJ, with a destruction rate of 7.9–8.5 times higher than other components.Keywords
Funding Information
- Grant of Guoneng Nanjing Electric Power Test & Re-search Limited (DY2024Y02)
This publication has 18 references indexed in Scilit:
- Long-short term memory modeling and performance analysis of extended-state Kalman filter-based energy-saving model predictive control for supercritical unitApplied Thermal Engineering, 2025
- Modelica-based heating surface modelling and dynamic exergy analysis of 300 MW power plant boilerEnergy Conversion and Management, 2024
- Energy, exergy, and economic analysis of a centralized solar and biogas hybrid heating system for rural areasEnergy Conversion and Management, 2022
- Transient simulation and exergy analysis of a D-type steam boiler with natural circulation during cold start: A case studyApplied Thermal Engineering, 2022
- Peak-shaving scheme for coal-fired power plant integrating flexible carbon capture and wastewater treatmentEnergy Conversion and Management, 2022
- Novel combined extended-advanced exergy analysis methodology as a new tool to assess thermodynamic systemsEnergy Conversion and Management, 2021
- Energy-exergy analysis and energy efficiency improvement of coal-fired industrial boilers based on thermal test dataApplied Thermal Engineering, 2018
- Dynamic modeling, simulation and optimization of a subcritical steam power plant. Part I: Plant model and regulatory controlEnergy Conversion and Management, 2017
- Energy, exergy and economic analyses of a novel system to recover waste heat and water in steam power plantsEnergy Conversion and Management, 2017
- Heat transfer entropy resistance for the analyses of two-stream heat exchangers and two-stream heat exchanger networksApplied Thermal Engineering, 2013