Flexural Strengthening of Two-Way RC Slabs with Cut Openings Using Textile-Reinforced Mortar Composites
- 1 June 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 25 (3) , 04021018
Abstract
This paper presents an experimental investigation on the application of textile-reinforced mortar (TRM) layers as a means of increasing the flexural capacity of two-way reinforced concrete (RC) slabs with cut openings. The investigated parameters included the number of TRM layers (one versus two layers), the textile type (two carbon fiber textiles with different weight and geometry), the strengthening configuration (full coverage versus partial coverage via the use of diagonal strips), and the role of the matrix material (mortar versus epoxy resin). For this purpose, six large-scale two-way RC slabs with a central opening were constructed and tested to failure under monotonic loading distributed at four points. It was mainly concluded that TRM substantially enhanced the flexural capacity of the two-way RC slabs with a central cut opening and restored the original capacity of the slab without the opening. The effect of the various investigated parameters is discussed in terms of flexural capacity, post-yielding stiffness, and load resistance at the serviceability limit state. Finally, an already available simple design tool was refined based on the new results of this study. It was found to provide a good estimation of the flexural moment of resistance of the TRM-retrofitted slabs.Keywords
This publication has 45 references indexed in Scilit:
- Flexural Strengthening of RC Beams with an Externally Bonded Fabric-Reinforced Cementitious MatrixJournal of Composites for Construction, 2014
- Mortar-based systems for externally bonded strengthening of masonryMaterials and Structures, 2014
- Performance of RC Slab-Type Elements Strengthened with Fabric-Reinforced Cementitious-Matrix CompositesJournal of Composites for Construction, 2014
- Concrete confinement with a cement based high strength composite materialComposite Structures, 2014
- Bending load capacity of reinforced concrete slabs strengthened with textile reinforced concreteEngineering Structures, 2012
- Textile-Reinforced Mortar versus FRP as Strengthening Material for Seismically Deficient RC Beam-Column JointsJournal of Composites for Construction, 2011
- Externally bonded grids as strengthening and seismic retrofitting materials of masonry panelsConstruction and Building Materials, 2011
- Mechanically Fastened FRP-Strengthened Two-Way Concrete Slabs with and without CutoutsJournal of Composites for Construction, 2009
- CFRP strengthened openings in two-way concrete slabs – An experimental and numerical studyConstruction and Building Materials, 2007
- Textile reinforced concrete for strengthening in bending and shearMaterials and Structures, 2006