Optimal placement of additional switch in the photovoltaic single-phase grid-connected transformerless full bridge inverter for reducing common mode leakage current
Authors:
- 1 October 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 408-412
Abstract
Single phase converters are popular for grid connected applications at low power. In photovoltaic (PV) application, it is possible to remove the transformer from the PV system in order to improve the efficiency and reduce losses, size, and cost. The direct conductive connection of the grid and the DC source through transformerless PV inverter introduce a leakage current. Stray capacitance between the earth and the PV panels cause to the leakage current. This current increases current harmonics injected into the utility grid, the radiated and conducted electromagnetic emissions, and losses. Spectrum and amplitude of the leakage current depends on the converter topology, switching strategy and the resonant circuit formed by the parasitic capacitance, the AC filter, the converter and the grid. In this paper, an additional switch is added to the full-bridge inverter to reduce the common mode leakage current. Then the fifth switch is located in four places and the MATLAB/SIMULINK simulation results of these four configurations are presented and compared. Finally, the optimized placement for this switch is investigated based on simulation results.Keywords
This publication has 21 references indexed in Scilit:
- A novel deadbeat controller for single phase PV grid connected inverters2015
- A novel vehicular integrated power system realized with multi-port series ac link converter2015
- A novel modified deadbeat controller for vehicle to grid application2015
- Modeling and Analyzing Multiport Isolation Transformer Capacitive Components for Onboard Vehicular Power ConditionersIEEE Transactions on Industrial Electronics, 2014
- Piecewise linear modeling of snubberless dual active bridge commutation2014
- High impedance grounding for onboard plug-in hybrid electric vehicle chargers2013
- A robust multi-resonant PR regulator for three-phase grid-connected VSI using direct pole placement design strategy2013
- Seamless Transfer of Single-Phase Grid-Interactive Inverters Between Grid-Connected and Stand-Alone ModesIEEE Transactions on Power Electronics, 2009
- A Single-Stage PV Module Integrated Converter Based on a Low-Power Current-Source InverterIEEE Transactions on Industrial Electronics, 2008
- Transformerless Inverter for Single-Phase Photovoltaic SystemsIEEE Transactions on Power Electronics, 2007