SF6 Optimized O2 Plasma Etching of Parylene C
Open Access
- 2 April 2018
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 9 (4) , 162
Abstract
Parylene C is a widely used polymer material in microfabrication because of its excellent properties such as chemical inertness, biocompatibility and flexibility. It has been commonly adopted as a structural material for a variety of microfluidics and bio-MEMS (micro-electro-mechanical system) applications. However, it is still difficult to achieve a controllable Parylene C pattern, especially on film thicker than a couple of micrometers. Here, we proposed an SF6 optimized O2 plasma etching (SOOE) of Parylene C, with titanium as the etching mask. Without the SF6, noticeable nanoforest residuals were found on the O2 plasma etched Parylene C film, which was supposed to arise from the micro-masking effect of the sputtered titanium metal mask. By introducing a 5-sccm SF6 flow, the residuals were effectively removed during the O2 plasma etching. This optimized etching strategy achieved a 10 μm-thick Parylene C etching with the feature size down to 2 μm. The advanced SOOE recipes will further facilitate the controllable fabrication of Parylene C microstructures for broader applications.Keywords
This publication has 30 references indexed in Scilit:
- Parylene C-Based Flexible Electronics for pH Monitoring ApplicationsSensors, 2014
- Electroplated Nickel Multielectrode Microprobes With Flexible Parylene Cable for Neural Recording and StimulationJournal of Microelectromechanical Systems, 2013
- Novel flexible Parylene neural probe with 3D sheath structure for enhancing tissue integrationLab on a Chip, 2012
- Flexible parylene-based multielectrode array technology for high-density neural stimulation and recordingSensors and Actuators B: Chemical, 2008
- Plasma removal of Parylene CJournal of Micromechanics and Microengineering, 2008
- Micromachined High-Aspect-Ratio Parylene Spring and Its Application to Low-Frequency AccelerometersJournal of Microelectromechanical Systems, 2006
- Parylene flexible neural probes integrated with microfluidic channelsLab on a Chip, 2005
- Downstream oxygen etching characteristics of polymers from the parylene familyJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2003
- Fine‐Line Patterning of Parylene‐n by Reactive Ion Etching for Application as an Interlayer DielectricJournal of the Electrochemical Society, 1996
- Patterning of poly-para-xylylenes by reactive ion etchingJournal of Vacuum Science & Technology A, 1983