Effect of Heat Treatment on the Microstructure and Mechanical Properties of Nitrogen-Alloyed High-Mn Austenitic Hot Work Die Steel
Open Access
Abstract
In view of the requirements for mechanical properties and service life above 650 °C, a high-Mn austenitic hot work die steel, instead of traditional martensitic hot work die steel such as H13, was developed in the present study. The effect of heat treatment on the microstructure and mechanical properties of the newly developed work die steel was studied. The results show that the microstructure of the high-Mn as-cast electroslag remelting (ESR) ingot is composed of γ-Fe, V(C,N), and Mo2C. V(C,N) is an irregular multilateral strip or slice shape with severe angles. Most eutectic Mo2C carbides are lamellar fish-skeleton-like, except for a few that are rod-shaped. With increasing solid solution time and temperature, the increased hardness caused by solid solution strengthening exceeds the effect of decreased hardness caused by grain size growth, but this trend is reversed later. As a result, the hardness of specimens after various solid solution heat treatments increases first and then decreases. The optimal combination of hardness and austenitic grain size can be obtained by soaking for 2 h at 1170 °C. The maximum Rockwell hardness (HRC) is 47.24 HRC, and the corresponding austenite average grain size is 58.4 μm. When the solid solution time is 3 h at 1230 °C, bimodality presented in the histogram of the austenite grain size as a result of further progress in secondary recrystallization. Compared with the single-stage aging, the maximum impact energy of the specimen after two-stage aging heat treatment was reached at 16.2 J and increased by 29.6%, while the hardness decreased by 1–2 HRC. After two-stage aging heat treatment, the hardness of steel reached the requirements of superior grade H13, and the maximum impact energy was 19.6% higher than that of superior grade H13, as specified in NADCA#207-2003.Keywords
This publication has 19 references indexed in Scilit:
- Mechanism of improvement on strength and toughness of H13 die steel by nitrogenMaterials Science and Engineering: A, 2015
- Effects of heat treatment on the microstructures and mechanical properties of a new type of nitrogen-containing die steelInternational Journal of Minerals, Metallurgy and Materials, 2012
- Prediction of austenite grain growth during austenitization of low alloy steelsMaterials & Design (1980-2015), 2008
- Development of Laboratory and Industrial Installations for One Stage Production of HNSMaterials and Manufacturing Processes, 2004
- Manufacturing and Applications of High Nitrogen SteelsMaterials and Manufacturing Processes, 2004
- Austenitic Die Steels and Alloys for Hot Deformation of MetalsMetal Science and Heat Treatment, 2001
- Thermodynamic model for precipitation of carbonitrides in high strength low alloy steels containing up to three microalloying elements with or without additions of aluminiumMaterials Science and Technology, 1992
- Development of hot-work tool steel for high-temperature applicationsMetals Technology, 1981
- Microstructure and normal grain growth in metals and ceramics. Part I. TheoryJournal of Applied Physics, 1980
- Heat resistance of tool steels and alloysMetal Science and Heat Treatment, 1973