Flow Configurations of Membraneless Microfluidic Fuel Cells: A Review
Open Access
Abstract
Membraneless microfluidic fuel cells (MMFCs) are being studied extensively as an alternative to batteries and conventional membrane fuel cells because of their simple functioning and lower manufacturing cost. MMFCs use the laminar flow of reactant species (fuel and oxidant) to eliminate the electrolyte membrane, which has conventionally been used to isolate anodic and cathodic half-cell reactions. This review article summarizes the MMFCs with six major categories of flow configurations that have been reported from 2002 to 2020. The discussion highlights the critical factors that affect and limit the performance of MMFCs. Since MMFCs are diffusion-limited, most of this review focuses on how different flow configurations act to reduce or modify diffusive mixing and depletion zones to enhance the power density output. Research opportunities are also pointed out, and the challenges in MMFCs are suggested to improve cell performance and make them practical in the near future.Keywords
Funding Information
- National Research Foundation of Korea (2019R1A2C1007657)
This publication has 210 references indexed in Scilit:
- Membraneless microfluidic microbial fuel cell for rapid detection of electrochemical activity of microorganismBioresource Technology, 2013
- Glycerol oxidation in a microfluidic fuel cell using Pd/C and Pd/MWCNT anodes electrodesInternational Journal of Hydrogen Energy, 2013
- Microfluidic redox batteryLab on a Chip, 2013
- Electricity storage for intermittent renewable sourcesEnergy & Environmental Science, 2012
- Membraneless, Room-Temperature, Direct Borohydride/Cerium Fuel Cell with Power Density of Over 0.25 W/cm2Journal of the American Chemical Society, 2012
- Chaotic flow-based fuel cell built on counter-flow microfluidic network: Predicting the over-limiting current behaviorJournal of Power Sources, 2011
- PdCo supported on multiwalled carbon nanotubes as an anode catalyst in a microfluidic formic acid fuel cellJournal of Power Sources, 2011
- Design, fabrication, and characterization of a planar, silicon-based, monolithically integrated micro laminar flow fuel cell with a bridge-shaped microchannel cross-sectionJournal of Power Sources, 2011
- Characterization of bubble formation in microfluidic fuel cells employing hydrogen peroxideJournal of Power Sources, 2011
- Electrochemical sensing in paper-based microfluidic devicesLab on a Chip, 2009