Enhanced removal of rare earth elements from aqueous media: exploring the potential of AM-3 and AM-4 titanosilicates
Open Access
- 2 April 2024
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (20) , 28856-28869
Abstract
This study investigates the impact of three key variables on the performance of nanoporous AM-3 and layered AM-4 titanosilicates in removing nine REEs (Y, La, Ce, Pr, Nd, Eu, Gd, Tb, and Dy) from natural mineral water and identifies optimal operational conditions using Response Surface Methodology (RSM). The experimental conditions were determined by a Box-Behnken Design of 3 factors-3 levels (pH 4, 6, and 8; sorbent dose 20, 100, and 180 mg/L; and element concentration 1, 3, and 5 μmol/L). Three-dimensional response surfaces were used to assess the linear, quadratic, and interaction influences of each factor on the REEs’ removal percentage. The pH was the most significant factor in the removal process using AM-3, while the sorbent dose was more important for AM-4. The results highlighted the sorbents’ strong capacity for REE removal. The optimal operating conditions obtained by RSM were applied to aqueous solutions with salinity 10 (common in coastal and transitional systems) and 30 (average seawater salinity). The results showed that AM-3 has a strong potential for removing REEs in solutions with salinity 10 and 30, while AM-4 was less efficient due to competition between REEs and other ions present in the solution.Keywords
Funding Information
- FCT/MCTES, Fundação para a Ciência e Tecnologia and Ministério da Ciência, Tecnologia e Ensino Superior (UIDB/50006/2020, UIDP/50006/2020, UIDB/50011/2020, UIDP/50011/2020, SFRH/BD/139471/2018, 2020.05323.BD)
- AFCT/MCTES, Fundação para a Ciência e Tecnologia and Ministério da Ciência, Tecnologia e Ensino Superior (CEECIND/03511/2018)
- Universidade de Aveiro
This publication has 21 references indexed in Scilit:
- Optimization of Nd(III) removal from water by Ulva sp. and Gracilaria sp. through Response Surface MethodologyJournal of Environmental Chemical Engineering, 2021
- Lanthanum biosorption using sericin/alginate particles crosslinked by poly(vinyl alcohol): Kinetic, cation exchange, and desorption studiesJournal of Environmental Chemical Engineering, 2021
- Two-stage selective recovery process of scandium from the group of rare earth elements in aqueous systems using activated carbon and silica composites: Dual applications by tailoring the ligand grafting approachChemical Engineering Journal, 2018
- Titanosilicates in cation adsorption and cation exchange – A reviewChemical Engineering Journal, 2017
- Application of response surface methodology and artificial neural network methods in modelling and optimization of biosorption processBioresource Technology, 2014
- Recycling of rare earths: a critical reviewJournal of Cleaner Production, 2013
- Removal of Hg2+ ions from aqueous solution by ETS-4 microporous titanosilicate—Kinetic and equilibrium studiesChemical Engineering Journal, 2009
- Cadmium(II) removal from aqueous solution using microporous titanosilicate ETS-4Chemical Engineering Journal, 2009
- Box-Behnken design: An alternative for the optimization of analytical methodsAnalytica Chimica Acta, 2007
- Microporous Titanosilicates and other Novel Mixed Octahedral-Tetrahedral Framework OxidesEuropean Journal of Inorganic Chemistry, 2000