Enhancement of electrical conductivity and other related properties of epoxidized natural rubber/carbon nanotube composites by optimizing concentration of 3‐aminopropyltriethoxy silane
Authors:
- 10 November 2016
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 57 (4) , 381-391
Abstract
Carbon nanotube (CNT)‐filled epoxidized natural rubber (ENR) composites were prepared by mixing in an internal mixer and thereafter on a two‐roll mill. Silane coupling agent, namely 3‐aminopropyltriethoxy silane (APTES), was directly incorporated in the ENR‐CNT composites during mixing of rubber and CNTs in the mixer, to perform in situ functionalization. It was found that pre‐crosslinking of ENR and APTES occurred especially at high APTES concentrations, such as 0.06 mL/(g of CNTs) and caused strong CNT agglomeration in the ENR matrix. However, the pre‐crosslinking could be reduced or avoided by decreasing the APTES concentration. In the concentration range 0.01–0.015 mL/(g of CNTs) of APTES, the APTES molecules were grafted on the CNT surfaces and generated new chemical linkages with the ENR. This improved the CNT dispersion in the ENR matrix and enhanced the composite properties. A very low approximately 0.5 phr of CNT threshold concentration for electric percolation was achieved in this type of composites. Also, three‐dimensional connected CNT networks were found to form in the ENR matrix at very low APTES levels. Thus, the electrical conductivity achieved in these composites reached the level required of conductive materials. POLYM. ENG. SCI., 57:381–391, 2017. © 2016 Society of Plastics EngineersKeywords
Funding Information
- Thailand Research Fund through the Royal Golden Jubilee PH.D. Program (PHD/0168/2552)
- Thailand Research Fund through the DAAD-TRF Project-Based Personnel Exchange Program 2011 (53198255)
This publication has 32 references indexed in Scilit:
- Influence of aminosilane‐functionalized carbon nanotubes on the rheometric, mechanical, electrical and thermal degradation properties of epoxidized natural rubber nanocompositesPolymer International, 2013
- Influence of modified natural rubber and structure of carbon black on properties of natural rubber compoundsPolymer Composites, 2012
- Influence of epoxide level and reactive blending on properties of epoxidized natural rubber and nylon‐12 blendsAdvances in Polymer Technology, 2011
- Mechanical, electrical and spectroscopic investigations of carbon nanotube-reinforced elastomersVibrational Spectroscopy, 2009
- Bonding between precipitated silica and epoxidized natural rubber in the presence of silane coupling agentJournal of Applied Polymer Science, 1999
- Effect of Surface Oxidation of Carbon Black on Its Bonding with Epoxidized Natural Rubber in the Presence of Silane Coupling AgentRubber Chemistry and Technology, 1999
- Effect of silane coupling agent on the chemorheological behaviour of epoxidised natural rubber filled with precipitated silicaPolymer, 1998
- Chemical Interaction between Surface Oxidized Carbon Black and Epoxidized Natural RubberRubber Chemistry and Technology, 1997
- Filler-Elastomer Interactions. Part VIII. The Role of the Distance between Filler Aggregates in the Dynamic Properties of Filled VulcanizatesRubber Chemistry and Technology, 1993
- Self-vulcanizable rubber blend system based on epoxidized natural rubber and carboxylated nitrile rubberJournal of Polymer Science Part C: Polymer Letters, 1989