Development of an automated multi-stage continuous reactive crystallization system with in-line PATs for high viscosity process
- 3 July 2018
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 3 (5) , 658-667
Abstract
An automated multi-stage continuous reaction system with in-line PATs for a high viscosity reactive crystallization process was developed in the present study. Data acquisition (DAQ) hardware and Labview software were used as the local control system. A “forward-backward” burst pumping strategy was developed to smoothly transfer the highly viscous hot slurry from one vessel to the next. In addition, a comparative analysis between a plug flow reactor (PFR) and continuous stirred-tank reactors (CSTRs) in series revealed that to achieve the same conversion, the latter would require more volume than the former, but less than a single CSTR. For a second-order reaction, the value of the Damköhler number necessary to achieve conversion of 90.0% in a single CSTR is 90. Thus, it is reasonable to approximate a PFR using CSTRs in series to obtain a high yield with a smaller reaction volume (compared with a single CSTR). As the probes could not be positioned in the hot slurry due to fouling issues, in-line focused beam reflectance measurement (FBRM) and React IR were used to monitor the crystal size and reactant concentration in the vessel containing the cold slurry. E-factors of batch and continuous processes were also compared and the continuous reaction could obtain a lower E-factor because less waste was generated.Keywords
Funding Information
- U.S. Food and Drug Administration (HHSF223201610104C)
This publication has 67 references indexed in Scilit:
- Nucleation from SolutionScience, 2013
- Solid-State NMR Characterization of High-Loading Solid Solutions of API and Excipients Formed by ElectrospinningJournal of Pharmaceutical Sciences, 2012
- Mechanistic modelling of the drying behaviour of single pharmaceutical granulesEuropean Journal of Pharmaceutics and Biopharmaceutics, 2012
- Continuous flow reactors: a perspectiveGreen Chemistry, 2011
- Enantioselective, Palladium-Catalyzed α-Arylation of N-Boc Pyrrolidine: In Situ React IR Spectroscopic Monitoring, Scope, and Synthetic ApplicationsThe Journal of Organic Chemistry, 2011
- Continuous Plug Flow Crystallization of Pharmaceutical CompoundsCrystal Growth & Design, 2010
- Multistep Microchemical Synthesis Enabled by Microfluidic DistillationAngewandte Chemie International Edition, 2010
- Application of Attenuated Total Reflectance−Fourier Transform Infrared (ATR−FTIR) Technique in the Monitoring and Control of Anti-solvent CrystallizationIndustrial & Engineering Chemistry Research, 2005
- Principles of green chemistry: PRODUCTIVELY2005
- Modelling particle disruption of an organic fine chemical compound using Lasentec focussed beam reflectance monitoring (FBRM) in agitated suspensionsPowder Technology, 2005