Particleboard Production from Paulownia tomentosa (Thunb.) Steud. Grown in Portugal
Open Access
Abstract
Paulownia wood has raised high attention due to its rapid growth and fire resistance. The number of plantations in Portugal has been growing, and new exploitation methods are needed. This study intends to determine the properties of particleboards made with very young Paulownia trees from Portuguese plantations. Single layer particleboards were produced with 3-year-old Paulownia trees using different processing parameters and different board composition in order to determine the best properties for use in dry environments. The standard particleboard was produced at 180 °C and a 36.3 kg/cm2 pressure for 6 min using 40 g of raw material with 10% urea-formaldehyde resin. Higher particle size lead to lower-density particleboards, while higher resin contents lead to higher density of the boards. Density has a major effect on board properties with higher densities improving mechanical properties such as bending strength, modulus of elasticity (MOE) and internal bond, lower water absorption but higher thickness swelling and thermal conductivity. Particleboards meeting the requirements for dry environment according to NP EN 312 standard, could be produced with young Paulownia wood with acceptable mechanical and thermal conductivity properties with density around 0.65 g/cm3 and a thermal conductivity of 0.115 W/mK.Keywords
Funding Information
- Project VALPT (PROJ/IPV/ID&I/003, UIDB/00681/2020, UIDB/04033/2020, UIDB/04625/2020)
- Caixa Geral de Depósitos (PROJ/IPV/ID&I/003, UIDB/00681/2020, UIDB/04033/2020, UIDB/04625/2020)
- FCT—Fundação para a Ciência e Tecnologia (PROJ/IPV/ID&I/003, UIDB/00681/2020, UIDB/04033/2020, UIDB/04625/2020)
- Fundação para a Ciência e a Tecnologia (PROJ/IPV/ID&I/003, UIDB/00681/2020, UIDB/04033/2020, UIDB/04625/2020)
- CITAB, Centre for the Research and Technology of Agro-Environmental and Biological Sciences (PROJ/IPV/ID&I/003, UIDB/00681/2020, UIDB/04033/2020, UIDB/04625/2020)
- CERIS, Civil Engineering Research and Innovation for Sustainability (PROJ/IPV/ID&I/003, UIDB/00681/2020, UIDB/04033/2020, UIDB/04625/2020)
This publication has 37 references indexed in Scilit:
- Reducing resin content and board density without adversely affecting the mechanical properties of particleboard through controlling particle sizeJournal of Forestry Research, 2011
- Effect of particle geometry on the properties of binderless particleboard manufactured from oil palm trunkMaterials & Design (1980-2015), 2010
- Effect of press cycle time and resin content on physical and mechanical properties of particleboard panels made from the underutilized low-quality raw materialsIndustrial Crops and Products, 2008
- Flame retardancy of paulownia wood and its mechanismJournal of Materials Science, 2007
- Evaluation of some of the properties of particleboard as function of manufacturing parametersMaterials & Design (1980-2015), 2007
- Some of the properties of particleboard made from paulowniaJournal of Wood Science, 2005
- New low-cost insulation particleboards from mixture of durian peel and coconut coirBuilding and Environment, 2004
- New insulating particleboards from durian peel and coconut coirBuilding and Environment, 2003
- Suitability of kiwi (Actinidia sinensis Planch.) prunings for particleboard manufacturingIndustrial Crops and Products, 2003
- Effect of particle shape on linear expansion of particleboardJournal of Wood Science, 2002