A 28GHz, Asymmetrical, Modified Doherty Power Amplifier, in 22nm FDSOI CMOS
Authors:
- 1 October 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
A 28GHz, Modified Doherty Power Amplifier (MDPA) was implemented in 22nm FDSOI CMOS technology from GF. The MDPA adopts an asymmetrical topology utilizing two cascode CMOS amplifiers as the main (Class-A) and auxiliary (Class-C). This allows a supply voltage of 2.5V and consequently higher output power. The use of a main Class-A amplifier is conducive to a higher linearity (IIP3). The integrated design implements the main and auxiliary amplifier, along with the matching and transmission line networks on chip. The fabricated amplifier occupies an area of 1.2mm 2 , exhibits 12 dBm saturated output power, a peak power gain of 10dB, 16% peak power-added efficiency (PAE) and 12.5% at 6-dB back-off. The measured IIP3 is 20dBm.Keywords
This publication has 12 references indexed in Scilit:
- A short survey on recent highly efficient cm-Wave 5G linear power amplifier design2017
- A 14-GHz, 22-dBm Series Doherty Power Amplifier in 45-nm CMOS SOI2016
- Will Doherty continue to rule for 5G?2016
- A Survey of 5G Network: Architecture and Emerging TechnologiesIEEE Access, 2015
- The Doherty power amplifier2015
- A Survey on Power-Amplifier-Centric Techniques for Spectrum- and Energy-Efficient Wireless CommunicationsIEEE Communications Surveys & Tutorials, 2014
- Active Millimeter-Wave Phase-Shift Doherty Power Amplifier in 45-nm SOI CMOSIEEE Journal of Solid-State Circuits, 2013
- $Q$-Band and $W$-Band Power Amplifiers in 45-nm CMOS SOIIEEE Transactions on Microwave Theory and Techniques, 2012
- Power Efficiency and Linearity Enhancement Using Optimized Asymmetrical Doherty Power AmplifiersIEEE Transactions on Microwave Theory and Techniques, 2010
- A 60 GHz Power Amplifier With 14.5 dBm Saturation Power and 25% Peak PAE in CMOS 65 nm SOIIEEE Journal of Solid-State Circuits, 2010