A three-dimensional computational model for inlet distortion in fan and compressor
Authors:
- 11 July 2017
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 232 (2) , 144-156
Abstract
The aim of this article is to develop a three-dimensional computational model to simulate the traveling process of inlet distortion in fan and compressor with low calculated costs. The model is established based on the body force model in the framework of modern Computational Fluid Dynamics technology. The flow is assumed to be axisymmetric in each meridional blade passage. The impact of the solid blade shapes on airflow is modeled with blade blockage factor and blade body force. The relationships between blade body force and blade inlet Mach number together with attack angle are established with the deviation angle model and loss model. Meanwhile, the effect of the turbulent mixing is also taken into consideration. This developed computational code is then applied to the investigation of a transonic fan rotor and of a four-stage low-speed axial compressor under clean and distorted inlet condition. The predicted performance of both the fan rotor and the four-stage compressor with clean inlet are in line with the experimental results. A quantitative comparison is made between the computational results and the measurement data of the fan rotor with inlet distortion. Additionally, the transfer behavior of inlet distortion in the four-stage compressor is simulated by the model. All results demonstrate the effectiveness and practicability of the model.Keywords
This publication has 24 references indexed in Scilit:
- CFD-based analysis of multistage throughflow surfaces with incidenceMechanics Research Communications, 2013
- A Study of Fan-Distortion Interaction Within the NASA Rotor 67 Transonic StageJournal of Turbomachinery, 2012
- Compressor Performance and Operability in Swirl DistortionJournal of Turbomachinery, 2011
- A time-marching throughflow model and its application in transonic axial compressorJournal of Thermal Science, 2010
- 1997 Best Paper Award—Education Committee: A Three-Dimensional Turbine Engine Analysis Compressor Code (TEACC) for Steady-State Inlet DistortionJournal of Turbomachinery, 1998
- Investigations on an axial flow fan stage subjected to circumferential inlet flow distortion and swirlJournal of Thermal Science, 1997
- A low-diffusion flux-splitting scheme for Navier-Stokes calculationsComputers & Fluids, 1997
- Annulus Wall Boundary-Layer Measurements in a Four-Stage CompressorJournal of Engineering for Gas Turbines and Power, 1986
- Modeling the 3-D Flow Effects on Deviation Angle for Axial Compressor Middle StagesJournal of Engineering for Gas Turbines and Power, 1986
- Stalling Pressure Rise Capability of Axial Flow Compressor StagesJournal of Engineering for Power, 1981