The 3D Printing Behavior of Photocurable Ceramic/Polymer Composite Slurries Prepared with Different Particle Sizes
Open Access
- 30 July 2022
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 12 (15) , 2631
Abstract
Ceramic polymer composite slurries were prepared using nano- and micro-sized Al2O3 in order to analyze rheological properties, sedimentation, and curing behavior. Slurries with different Al2O3 particle sizes were prepared with varying concentrations of photoinitiator, and subjected to different exposure times to prepare a printing object. All slurries exhibit shear-thinning behavior, and the viscosity increases with decreasing Al2O3 particle size. The 100 nm Al2O3 slurry is confirmed to be more sol-like, while the 500 nm and 2 μm Al2O3 slurries have a gel-like structure. As the Al2O3 particle size increases, a thick sedimentation layer forms due to rapid settling, but as the distance between particles increases, the UV light scattering reduces, and the curing rate increases. The exposure time range viable for printing, and the dimension conformity of the printed specimen with the design file, is improved by increasing the Al2O3 particle size. In the case of 500 nm and 2 μm Al2O3 slurries, the maximum heat flow, curing enthalpy, and conversion rate are high with respect to photoinitiator concentration, in the order of 1.0 > 0.1 > 3.0 wt.%. When the photoinitiator concentration exceeds 1 wt.%, it appears to affect the reactivity of the slurry.Keywords
Funding Information
- Ministry of Trade, Industry and Energy (20010483)
This publication has 22 references indexed in Scilit:
- Additive Manufacturing of Dense Alumina CeramicsInternational Journal of Applied Ceramic Technology, 2014
- Influence of temperature and UV intensity on photo-polymerization reaction studied by photo-DSCJournal of Thermal Analysis and Calorimetry, 2012
- Flow behavior of polymerizable ceramic suspensions as function of ceramic volume fraction and temperatureJournal of the European Ceramic Society, 2011
- Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithographyJournal of Photochemistry and Photobiology A: Chemistry, 2011
- Stability mechanism of W/O crude oil emulsion stabilized by polymer and surfactantColloids and Surfaces A: Physicochemical and Engineering Aspects, 2011
- Rheology studies on highly filled nano-zirconia suspensionsJournal of the European Ceramic Society, 2007
- Rheological properties of resin composites according to the change of monomer and filler compositionsJournal of Korean Academy of Conservative Dentistry, 2004
- Colloidal Processing of CeramicsJournal of the American Ceramic Society, 2000
- TURBISCAN MA 2000: multiple light scattering measurement for concentrated emulsion and suspension instability analysisTalanta, 1999
- Characterisation of instability of concentrated dispersions by a new optical analyser: the TURBISCAN MA 1000Colloids and Surfaces A: Physicochemical and Engineering Aspects, 1999