Influence of proximal supportive design of zirconia framework on fracture load of veneering porcelain
- 1 January 2013
- journal article
- Published by Japanese Society for Dental Materials and Devices in Dental Materials Journal
- Vol. 32 (4) , 572-577
Abstract
The purpose of the present study is to examine the relationship between the supportive designs of proximal region of zirconia framework on the fracture load. The zirconia frameworks with four different supportive designs on the proximal region were fabricated and classified with their radiuses of curvature (R): R=0.5 mm, R=1.0 mm, R=1.5 mm, and R=2.0 mm. The zirconia frameworks were conditioned with sandblast and veneering porcelain was fired. Subsequently, fracture tests were performed at 3 different load points: right above the lowest point of the boundary between veneering porcelain and zirconia framework; 0.5 mm inside from right above point; and 0.5 mm outside from right above point. The fracture load increased with an increase in the radius of curvature of supportive design when loading was applied from above and inside. This suggested that supportive design influenced the fracture load.Keywords
This publication has 22 references indexed in Scilit:
- Influence of surface treatment on bond strength of veneering ceramics fused to zirconiaDental Materials Journal, 2012
- Fracture stability of anterior zirconia crowns with different core designs and veneered using the layering or the press-over techniqueEuropean Journal of Oral Sciences, 2011
- The influence of zirconia coping designs on the fracture load of all-ceramic molar crownsDental Materials Journal, 2011
- Thermal/mechanical simulation and laboratory fatigue testing of an alternative yttria tetragonal zirconia polycrystal core‐veneer all‐ceramic layered crown designEuropean Journal of Oral Sciences, 2010
- Influence of substructure design and spacer settings on the in vitro performance of molar zirconia crownsJournal of Dentistry, 2009
- A 3-year retrospective and clinical follow-up study of zirconia single crowns performed in a private practiceJournal of Dentistry, 2009
- All-ceramic inlay-retained fixed partial dentures: Preliminary results from a clinical studyJournal of Dentistry, 2008
- Microtensile bond strength of different components of core veneered all-ceramic restorationsDental Materials, 2005
- The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramicThe Journal of Prosthetic Dentistry, 2003
- Mechanical property evaluation of pressable restorative ceramicsDental Materials, 2000