Investigation on Residual Stress Loss during Laser Peen Texturing of 316L Stainless Steel
Open Access
- 26 August 2019
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 9 (17) , 3511
Abstract
Laser peen texturing (LPT) is a novelty way of surface texturing based on laser shock processing. One of the most important benefits of LPT is that it can not only fabricate surface textures but also induce residual compressive stress for the target material. However, the residual stress loss leads to partial loss of residual compressive stress and even causes residual tensile stress at the laser spot center. This phenomenon is not conducive to improving the mechanical properties of materials. In this study, a numerical simulation model of LPT was developed and validated by comparison of surface deformation with experiments. In order to investigate the phenomenon of residual stress loss quantitatively, an evaluation method of residual stress field was proposed. The effects of laser power density and laser spot radius on the residual stress, especially the residual stress loss, were systematically investigated. It is found that with the increase of laser power density or laser spot radius, the thickness of residual compressive layer in depth direction becomes larger. However, both the magnitude and the affecting zone size of residual stress loss will be increased, which implies a more severe residual stress loss phenomenon.Keywords
Funding Information
- National Natural Science Foundation of China (51605296)
- Fundamental Research Funds for the Central Universities (2232018D3-04, 2232018A3-08)
This publication has 30 references indexed in Scilit:
- Influence of Surface Texture Characteristics on the Noise in Grooving Concrete PavementApplied Sciences, 2018
- Investigations on femtosecond laser modified micro-textured surface with anti-friction property on bearing steel GCr15Applied Surface Science, 2018
- Study on Lubrication Performance of Journal Bearing with Multiple Texture DistributionsApplied Sciences, 2018
- Bio-Inspired Functional Surfaces Based on Laser-Induced Periodic Surface StructuresMaterials, 2016
- Experimental study on laser microstructures using long pulseOptics and Lasers in Engineering, 2016
- Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplastyCeramics International, 2015
- The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contactApplied Surface Science, 2013
- The Effect of Elastomer Surface Texturing in Soft Elasto-Hydrodynamic LubricationTribology Letters, 2009
- State of the Art in Laser Surface TexturingJournal of Tribology, 2005
- Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive ComponentsTribology Transactions, 2002